Panasonic CQC500U Auto Radio/cd/ Mp3 Deck - Multi Language - Page 22
As Needed, Audio Setting
UPC - 037988758395
View all Panasonic CQC500U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Audio Setting Adjustment to each speaker and an optional subwoofer 1 Press [VOL] (PUSH SEL: Select) to open the menu. 2 Press [VOL] (PUSH SEL: Select) to select a mode to be adjusted. 3 Turn [VOL] clockwise or counterclockwise to adjust. SQ Adjustment ( page 13) (Adjustable range: 12 dB to 12 dB (by 2 dB)) Setting range: SQ Low/Bass: ±12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz) SQ Mid: ±12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz) SQ High/Treble: ±12 dB (at 8 kHz, 10 kHz, 12 kHz, 15 kHz) Audio Menu Display Notes: • The sequence and contents of setting items may depend on the conditions of devices to be connected. For further information, refer to the System Upgrade Guidebook or the instruction manuals for the devices to be connected. • To return to the regular mode, press [DISP]. • If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume adjustment, 10 seconds in the SQ adjustment), the display returns to the regular mode. • The volume can also be adjusted directly using [VOL] on the main unit. ( page 12) • Please refer to page 13 for calling up a preset SQ. Volume Adjustment (Setting range: 0 to 40, Default: 18) 1: Up 2: Down Balance Adjustment (Setting range: L (left) 15 to R (right) 15 and Center, Default: Center) 1: Right enhanced 2: Left enhanced Fader Adjustment (Setting range: R (rear) 15 to F (front) 15 and Center, Default: Center) 1: Front enhanced 2: Rear enhanced Subwoofer Level Adjustment (Setting range : mute 6 dB to 6 dB, 2 dB Step, Default: 0 dB) 1: Up 2: Down Bass Adjustment (Setting range: 12 dB to 12 dB, 2 dB Step, Default: Bass 0 dB) 1: Up 2: Down Subwoofer Low Pass Filter (Setting range: 80 Hz, 120 Hz, Default: 80 Hz) 1: 120 Hz 2: 80 Hz Treble Adjustment (Setting range: 12 dB to 12 dB, 2 dB Step, Default: Treble 0 dB) 1: Up 2: Down Note: Do not activate SQ and Bass/Treble at the same time to avoid causing sound distortion. Re-master Setting High-range signal lost through MP3/WMA/AAC compression is reproduced to more closely recreate the pre-compression sound. (Setting range: On/Off, Default: On) 1: On 2: Off Notes: • At high bit rates, the Re-master function may have little effect. • It is only effective for playback of MP3/WMA/AAC data. 22 CQ-C500U