Panasonic CQC7301U Auto Radio/cd Deck - Page 19
Display Setting, Customize The Display, Graphic Pattern, Still Image, Opening Message, Contrast
View all Panasonic CQC7301U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Display Setting Adjustment to display on the DISPLAY menu 1 Press [MENU] to display the menu display. For using the remote CQ-C8401U control, hold down [SEL] (MENU) for 2 sec. or more. STILL IMAGE (Setting range: 11types, Default: All) Switching by []] or [[] All: Sequential display from pattern 1 to 10 No.1-10 DISPLAY Menu Display 2 Press []] or [[] to display the DISPLAY menu. 3 Press [}] or [{] to select a function to be adjusted. 4 Press [BAND] (SET) to confirm CQ-C8401U the display. 5 Adjust the setting value. 6 Press [BAND] (SET). 7 Press [MENU] to confirm the adjustment. For using the remote control, hold down [SEL] (MENU) for 2 sec. or more. GRAPHIC PATTERN (Setting range: 6 types, Default: All) Switching by []] or [[] All: Sequential display from pattern A to D. Pattern A-D S.A.: 19-band display (Spectrum analyzer) CONTRAST (Setting range: 1 to 5, Default: Contrast 3) [[]: Tilting up view angle []]: Tilting down view angle CLOCK ADJ Note: Adjust the clock when "ADJUST" appears on the display. [[]: Adjusting minutes []]: Adjusting hours [}]: Forward [{]: Backward Notes: ¡ The graphic pattern and still image are changeable. (a page 37) ¡ If corrupted data is selected, "DISPLAY FILE INCOM- PLETE" appears. (a page 38) 36 CQ-C8401U/C8301U/C7401U/C7301U Customize the Display (Customize Function) You can edit the moving images and still images that are initially stored in the unit. You also can use the data that is downloaded from the Panasonic Web site and the data that is stored with a digital camera or other devices and processed with exclusive software, IMAGE STUDIO. See "Notes on Customize function" (a page 38) as well. Note: Visit Panasonic Web site (http://panasonic.co.jp/pas/en/software/customize/index.html) for details. Preparation: Put the CD-R/RW that contains data to be customized in hand. 1 If there is a disc inside, take out the disc. 2 Press [SRC] to select the CD SRC mode. 3 Hold down [SEL] for 4 sec. or more to display the menu screen. 6 Select a file. Select [BAND] (SET): Confirm Notes: ¡ Files are automatically identified by their exten- sions, and target files are displayed. ¡ If "BACK" is selected, the screen of step 5 appears. 7 For a moving image file or still image file, select where to save the file. CUSTOMIZE Menu Display 4 Load a CD-R/RW that contains data. Note: ¡ It may take time for the unit to identify the CDR/RW. ¡ Discs recorded by the packet writing software are not supported. 5 Select an item to be customized. []][[]: Select [BAND] (SET): Confirm Notes: ¡ New data overwrites existing data. ¡ If "BACK" is selected, the screen of step 6 appears. 8 Confirm the changed item. [}][{]: Select [BAND] (SET): Confirm Note: To exit the customize menu, hold down [SEL] 4 sec. or more. GRAPHIC PATTERN Moving image (graphic pattern) data (a page 36) STILL IMAGE Still image data (a page 36) OPENING MESSAGE Moving image at power on (a page 14) CLOSING MESSAGE Moving image at power off (a page 14) []][[]: Select [BAND] (SET): Confirm Customization is performed. Do not turn off the power in mid-operation. (It takes approx. 1 minutes to complete this operation for a 168 kB moving image.) After completion of this operation, the screen of step 5 appears. Note: If "NO" is selected, the screen of step 5 appears. 9 Hold down [SEL] 4 sec. or more. The CD mode comes back. Press the [OPEN] button to eject the disc. CQ-C8401U/C8301U/C7401U/C7301U 37 Display Setting, Customize the Display (Customize Function) English