Panasonic CQC9701U Auto Radio/cd Deck - Page 25
MAINTENANCE, CONTENTS BY FUNCTIONS, English, Clock adjustment, Temporary Volume off Down
View all Panasonic CQC9701U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Maintenance This unit is designed and manufactured to ensure the minimum of maintenance. Use a dry, soft cloth for routine exterior cleaning. Never use benzine, thinner, or other solvents. Cleaning the Unit If the fuse blows out, consult your dealer, or your nearest authorized Panasonic Servicenter. Warning Use fuses of the same specified rating (15 A). Using substitutes or fuses with higher ratings, or connecting the unit directly without a fuse could cause fire or damage to the unit. If the replaced fuse fails, contact your nearest authorized Panasonic Servicenter. Fuse Contents by Functions Clock adjustment (CLOCK ADJ) 13 Temporary Volume off (Down) (MUTE (ATT : Attenuation)) 15 Display Change (DISP : Display) 17 Dimmer Control (DIM : Dimmer) 17 SBC-SW: Super Bass Control-Subwoofer 18 Direct Memory (D • M : Direct Memory) 22 Contents by Functions 48 CQ-C9901U/C9801U/C9701U Specifications General Power Supply Tone Controls (Bass/Treble) Equalizer Center Frequency (SQ) Variable Range of Equalizer Current Consumption Maximum Power Output Power Output Speaker Impedance Pre-amp output voltage Subwoofer-output voltage Pre-amp output impedance Subwoofer-output impedance External Input Impedance External Input Sensitivity Dimensions (Main Unit) Weight (Main Unit) DC 12 V (11 V - 16 V), Test Voltage 14.4 V, Negative Ground Bass; ±12 dB at 80 Hz, Treble; ±12 dB at 6 kHz 62.5, 125, 250, 500, 1 k, 2 k, 4 k, 8 k, 16 k (Hz, default) -12 dB to 12 dB (2 dB step) Less than 2.5 A (CD mode, 0.5 W 4-Speaker) 70 W x 4 (at 1 kHz) volume control maximum 31 W x 4 (at 4 Ω) 4 - 8 Ω 5 V (CD mode; 1 kHz, 0 dB) 5 V 60 Ω 60 Ω 10 kΩ (AUX1, CH/AUX2 IN) Max. 2 V (AUX1, CH/AUX2 IN) 178 (W) x 50 (H) x 155 (D) mm {7˝ x 1 15/16˝ x 61/8˝} 1.7 kg {3 lbs. 12 oz} Sampling Frequency Pick-Up Type Light Source Wavelength Frequency Response Signal to Noise Ratio Total Harmonic Distortion Wow and Flutter Channel Separation 8 times oversampling Astigma 3-beam Semiconductor laser 790 nm 20 Hz - 20 kHz (±1 dB) 96 dB (2 V), 106 dB (5 V) 0.01 % (1 kHz) Below measurable limits 86 dB (2 V) CD Player Stereo Radio FM Frequency Range Usable Sensitivity 50 dB quieting sensitivity Frequency Response Alternate channel selectivity Stereo Separation Image response ratio IF response ratio Signal to noise ratio 87.9 MHz - 107.9 MHz 12.2 dBf. (1.12 µV, 75 Ω) 15.2 dBf. (1.59 µV, 75 Ω) 30 Hz - 15 kHz (±3 dB) 75 dB 40 dB (1 kHz) 75 dB 100 dB 62 dB AM Frequency Range Usable Sensitivity 530 kHz - 1 710 kHz 25 dB/µV (11V, S/N 20 dB) Above Specifications comply with EIA standards. Power Output: 31 W RMS x 4 Channels at 4 Ω and ≤ 1% THD+N Signal to Noise Ratio: 80 dBA (reference: 1 W into 4 Ω) Notes: ¡ Specifications and design are subject to modification without notice due to improvements. ¡ Some figures and illustrations in this manual may be different from your product. CQ-C9901U/C9801U/C9701U 49 Maintenance, Contents by Functions, Specifications English