Panasonic CQD5501U CQD5501U User Guide - Page 30

E N G Troubleshooting (continued) L I S H ■ CD 57 Problem Possible cause a Possible solution No playback or disc ejected The disc is inserted upside down. aInsert a disc correctly. There is a flaw or foreign objects on the disc. aRemove the foreign objects, or use a flawless disc. Sound skipping or noise There is a flaw or foreign objects on the disc. aRemove the foreign objects, or use a flawless disc. Sound skipping due to vibration Disc unejectable The unit is not sufficiently secured. aSecure the unit to the console box. The unit is tilted at over 30˚ in the front-to-end direction. aMake the angle 30˚ or less. Something such as a peeled label obstructs the disc coming out. aPress and hold the [OPEN] for more than 2 seconds when the face plate is open (disc forced ejection). In case that the disc forced ejection does not work, consult your dealer. The microcontroller in the unit operates abnormally due to noise or other factors. aUnplug the power cord and plug it again. In case the unit is still out of order, consult your dealer. ■ MP3 Problem Possible cause a Possible solution No playback or disc ejected The disc has unplayable formatted data. aRefer to the description about MP3 for playable sound data except CD- DA (i.e. music CD). The CD-R/RWs that are playable on other devices are not playable on this unit. Sound skipping or noise The playability of some CD-R/RWs may depend on the combination of media, recording software and recorder to be used even if these CD-R/RWs are playable on other devices such as a PC. aMake CD-R/RWs in a different combination of media, recording software and recorder after referring to the description about MP3. There is a flaw or foreign objects on the disc. aRemove the foreign objects, or use a flawless disc. For MP3, refer to the description about MP3. Playing VBR (Variable Bit Rate) files may cause sound skipping. aPlay Non-VBR files. Note: ¡Refer to "Notes on MP3". (a Page 26) 58 CQ-D5501U ■ DVD/VCD Problem No playback or disc ejected Sound skipping or noise Sound skipping due to vibration Disc unejectable The picture does not appear on the monitor. The picture appears incorrectly. Video CD menu playback does not work. The picture becomes distorted while fast forwarding or reversing. No subtitles appear. It is difficult to hear small sounds. (Dolby digital DVD software only) Cannot switch the audio language/subtitle language/angle. The audio/subtitle language selected in the user settings is not used. E N G L I S H 518 Possible cause a Possible solution There is a flaw or foreign objects on the disc. aRemove the foreign objects, or use a flawless disc. The disc has unplayable formatted data. aRefer to the description about available disc types. There is a flaw or foreign objects on the disc. aRemove the foreign objects, or use a flawless disc. The unit is not sufficiently secured. aSecure the unit to the console box. The unit is tilted at over 30˚ in the front-to-end direction. aMake the angle 30˚ or less. Something such as a peeled label obstructs the disc coming out. aPress and hold the [OPEN] for more than 2 seconds when the face plate is open (disc forced ejection). In case that the disc forced ejection does not work, consult your dealer. The microcontroller in the unit operates abnormally due to noise or other factors. aUnplug the power cord and plug it again. In case the unit is still out of order, consult your dealer. Cables are not correctly connected. aConnect cables correctly. aStop the car and apply the parking brake. The video signal setting of this unit (NTSC/PAL) does not match with the video signal setting of the connected monitor. aMake the same setting between this unit and the monitor. aVideo CD menu playback works only when playing a video CD that has the playback control feature. aA certain amount of distortion is normal. Subtitle must be recorded on the disc, or they will not appear. aRefer to the guide provided with your disc. aSet "D.Range Compression" to "Minimum". It is not possible to switch if the disc does not have multiple audio languages/subtitle languages/angles recorded on it. aRefer to the guide provided with your disc. aSome discs permit switching through a menu screen. aSometimes, switching angle is possible only with certain scenes. If audio or subtitles in that language are not recorded on the disc, the audio or subtitles do not switch to that language. (Some discs permit switching through a menu screen.) aRefer to the guide provided with your disc. 59 CQ-D5501U