Panasonic CT27SL13 CT20SL13 User Guide - Page 7

ENGLISH Optional Equipment Connections Note: The remote control must be programmed with supplied codes to operate the optional equipment. Please refer to page 8 for instructions. VCR Connection VCR's, video disc players, video game equipment, and DSS equipment can also be connected to the video inputs. See the optional equipment manual for more information. Note: VIDEO 1 input is a dual-purpose input. It is primarily intended for connection with 480i devices such as a DVD player using the Y PB PR component video jacks and Audio L & R jacks. However, it can also be connected to conventional composite video sources such as a VCR, using only the Y/Video jack and Audio L & R jacks. The on-screen label will display Component or Video 1 depending on which source is connected. Procedure • Connect equipment as shown to front or rear Audio/ Video input jacks. • Select the Video mode by pressing TV/VIDEO button. • Operate optional equipment as instructed in equipment manual. Note: Do not connect S-VIDEO and VIDEO signal to INPUT 2 at the same time. If both are connected, signal interference will result. Use either the S-VIDEO or the Video signal only. Cable Box Connection Follow this diagram when connecting your television to a Cable Box. Procedure • Tune the television to channel 3 or 4 depending on the RF out setting of the cable box. • Using the cable box, tune to the premium cable channel you want to view. OPTIONAL EQUIPMENT CONNECTIONS Digital TV - Set-Top Box (DTV-STB) or DVD Player Connection Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) to the back of your TV. Notes: • • There are three video inputs, Y, PB, and PR. Separate component color inputs provide luminance and color separation. Use the L (left) and R (right) audio inputs. Select DTV-STB to 480i output mode. TV set can receive 480i signal only. Amplifier Connection (TO AUDIO AMP) Connect to an external audio amplifier input for listening to a stereo system. Note: TO AUDIO AMP terminals can not be connected directly to externalspeakers. Audio Adjustments • Note: Select TV SPEAKERS ON from AUDIO menu. Set amplifier volume to minimum. Adjust television volume to desired level. Adjust amplifier volume to match the television. Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu. Volume, mute, bass, treble and balance are now controlled through the television. Select SPEAKERS OFF & FIXED AUDIO OUT to control audio functions through the external amplifier. Front Control Panel Use the front panel of the television to use the TV without remote or to use the Audio/Video input jacks for optional equipment. Procedure • Press TV/VIDEO to select VIDEO 3 input mode. Note: The front control panel can be used to access menus and switch video mode when the remote control is not available. 5 l