Panasonic CT32E14J CT32E14 User Guide - Page 8

ENGLISH OPTIONAL EQUIPMENT CONNECTIONS Optional Equipment Connections Note: The remote control must be programmed with supplied codes to operate the optional equipment (refer to page 9 for programming information). VCR Connection VCRs, video disc players, video game equipment, and DSS equipment can also be connected to the video inputs. See the optional equipment manual for more information. Note: VIDEO 1 input is a dual-purpose input. It is primarily intended for connection with 480i devices such as a DVD player using the Y PB PR component video jacks and Audio L & R jacks. However, it can also be connected to conventional composite video sources such as a VCR, using only the Y/Video jack and Audio L & R jacks. The on-screen label will display Component or Video 1 depending on which source is connected. ANT TERMINALS ON BACK OF TELEVISION INPUT 1 TO AUDIO AMP COMPONENT R-AUDIO-L VIDEO INPUT PR PB Y/VIDEO L INPUT 2 S-VIDEO R R-AUDIO-L VIDEO CABLES NOT INCLUDED VCR PLAY R E FF W STOP VIDEO OUT L AUDIO OUT R ANT OUT ANT IN HPJ VIDEO 3 L AUDIO IN R Incoming Cable FRONT A/V JACKS Jack used for 1/8" headphone plug Procedure • Connect equipment as shown to front or rear Audio/ Video input jacks. Note: Do not connect S-VIDEO and VIDEO signal to INPUT 2 at the same time. If both are connected, signal interference will result. Use either the S-VIDEO or the Video signal only. • Select the Video mode by pressing TV/VIDEO button. • Operate optional equipment as instructed in equipment manual. Cable Box Connection Follow this diagram when connecting your television to a Cable Box. CABLE BOX 15 ANT IN ANT OUT CONNECTION ON BACK OF TV INPUT 1 TO AUDIO AMP COMPONENT R-AUDIO-L VIDEO INPUT PR PB Y/VIDEO Incoming Cable ANT L INPUT 2 S-VIDEO R R-AUDIO-L VIDEO CABLES NOT SUPPLIED Procedure • Tune the television to channel 3 or 4 depending on the RF out setting of the cable box. • Using the cable box, tune to the premium cable channel you want to view. Digital TV - Set-Top Box (DTV-STB) or DVD Player Connection Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) to the back of your TV. CABLES NOT SUPPLIED TERMINALS ON BACK OF DTV-STB OR DVD PLAYER DIGITAL TV OUTPUT R-AUDIO-L Y PB PR COMPONENT VIDEO INPUT TERMINALS ON BACK OF TV INPUT 1 TO AUDIO AMP COMPONENT R-AUDIO-L VIDEO INPUT PR PB Y/VIDEO R-AUDIO-L VIDEO S-VIDEO NTSC OUTPUT L INPUT 2 S-VIDEO R R-AUDIO-L VIDEO Notes: • There are three video jacks, Y, PB, and PR. Separate component color inputs provide luminance and color separation. Use the L (left) and R (right) audio inputs. • Select DTV-STB to 480i output mode. TV set can receive 480i signal only. Picture distortion will result if any other type of format is selected (i.e. 480p, 720p or 1080i). Amplifier Connection (TO AUDIO AMP) To listen the audio through a separate stereo system, connect an external audio amplifier to TO AUDIO AMP outputs on back of television. Note: TO AUDIO AMP terminals cannot be connected directly to external speakers. External Amplifier TERMINALS ON BACK OF TELEVISION INPUT 1 TO AUDIO AMP R-AUDIO-L COMPONENT VIDEO INPUT PR PB Y/VIDEO L INPUT 2 S-VIDEO R R-AUDIO-L VIDEO CABLES NOT INCLUDED Audio Adjustments • Select TV SPEAKERS ON from AUDIO menu. • Set amplifier volume to minimum. • Adjust television volume to desired level. • Adjust amplifier volume to match the television. • Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu. • Volume, mute, bass, treble and balance are now controlled through the television. Note: Select SPEAKERS OFF & FIXED AUDIO OUT to control audio functions through the external amplifier. Front Control Panel Use the front panel of the television to use the TV without remote or to use the Audio/Video input jacks for optional equipment. Procedure • Press TV/VIDEO to select VIDEO 3 input mode. Note: The front control panel can be used to access menus and switch video mode when the remote control is not available. 6 z