Panasonic DC-ZS70 Advanced Operating Manual - Page 35
Zoom Lever (Use Zoom), Eye Sensor]
![]() |
View all Panasonic DC-ZS70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Basics Buttons/Ring/Dials/Levers Used for Recording Setting the sensitivity of the eye sensor or setting to switch the display between the viewfinder and monitor → [Custom] → [Eye Sensor] [Sensitivity] [LVF/Monitor Switch] Use this setting to set the sensitivity of the eye sensor. Use this setting to switch the display between the viewfinder and monitor. [LVF/MON AUTO] (Automatic switching between viewfinder and monitor) / [LVF] (Viewfinder display) / [MON] (Monitor display) •• After the display is switched using the [LVF] button, the setting of [LVF/ Monitor Switch] will also change. Zoom Lever (Use Zoom) You can adjust the area of a picture to be taken using the zoom or control ring. ••You can also use the zoom function from the touch panel. (→145) ••For details about zoom types and use, refer to (→142). Zoom lever 1 Move the zoom lever Control ring 1 Turn the control ring* T side: Telephoto, Enlarge the subject W side: Wide-angle, Capture a wider area Turning angle is large: Zoom speed is high Turning angle is small: Zoom speed is low * You can perform zoom operation by assigning the [Zoom] setting to the control ring. (→51) Clockwise: Telephoto, Enlarge the subject Counterclockwise: Wide-angle, Capture a wider area ●●Do not touch the lens barrel during zooming. ●●Adjust the focus after adjusting the zoom. ●●The camera may make a rattling noise and vibrate when the zoom lever or control ring is operated. This is not a malfunction. 35 DVQP1285
![](/manual_guide/products/panasonic-dczs70-advanced-operating-manual-7160396/35.png)