Panasonic DMC-FX5 Digital Still Camera-english/ Spanish - Page 92
CONNECTING TO OTHER EQUIPMENT, CONNECTING TO A PC, Turn on the camera and the PC. - driver
UPC - 037988977581
View all Panasonic DMC-FX5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Connecting to other equipment Connecting to other equipment Connecting to a PC You can acquire recorded pictures to a PC by connecting the camera and the PC. The software [LUMIX Simple Viewer] (for Windows®) in the CD-ROM (supplied) allows you to easily acquire pictures recorded with the camera to a PC, print them and send them by e-mail. If you use "Windows 98/98SE", install the USB driver and then connect it to the computer. For information about installing [LUMIX Simple Viewer] etc., refer to the separate operating instructions for PC connection. • Set the camera to a mode other than [ ] mode. 1 Turn on the camera and the PC. 2 Connect the camera to a PC via the USB connection cable (supplied). • Connect the USB connection cable with the [ ] mark facing the [] mark on the [DIGITAL] socket. • Hold the USB connection cable at and insert straight in or take straight out. (If you forcibly insert the USB connection cable at a slant or upside down you can deform the connection terminals and damage the camera or the connected equipment.) ACCESS DIGITAL AV OUT DC IN : USB connection cable (supplied) : AC adaptor (DMW-AC5; optional) • Use a battery with sufficient battery power or the AC adaptor (DMW-AC5; optional). • Turn the camera off before inserting or removing the cable for the AC adaptor (DMW-AC5; optional). 92 VQT0Y19 : This message appears during data transfer. [Windows] The drive appears in the [My Computer] folder. • If you are connecting the camera to a PC for the first time, the required driver is installed automatically so that the camera can be recognized by "Windows Plug and Play". The drive then appears on the [My Computer] folder. [Macintosh] The drive is displayed on the screen. • The drive is displayed as [LUMIX] when you connect the camera with no card inserted. • The drive is displayed as [NO_NAME] or [Untitled] when you connect the camera with a card inserted.