Panasonic DMC-LX7W DMC-LX7K Advanced Features Manuals (English) - Page 203
Using the filter (optional), it in the direction of arrow
View all Panasonic DMC-LX7W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
Others Digital Camera Accessory System Using the filter (optional) When you use a filter adaptor kit (optional: DMW-FA1), you can use the following filters. (As of July 2012) PL filter DMW-LPLA37* The PL filter helps suppress light reflected from a metal or non-spherical surface (flat non-metallic surfaces, water vapor or invisible fine particles in the air) and enables you to take still pictures with enhanced contrast. MC protector DMW-LMCH37 The MC protector is a transparent filter that causes little change in colors or light intensity and can be used to protect the camera lens. ND filter DMW-LND37 The ND filter does not cause any change in colors but it can reduce only the light intensity by 1/8th (equivalent to adjusting the aperture value by 3 stops). * You cannot use the camera with a PL filter (DMW-LPL37) installed on it. (The DMW-LPL37 is thicker than the DMW-LPLA37, so the surrounding parts of the screen may sometimes darken (when vignetting, for example).) ■■How to install a filter adaptor Preparation: ••Set [Sleep Mode] in the [Setup] menu to [OFF] (→36). ••Remove the lens cap, and turn the camera ON/OFF switch to [ON]. Thread protector Spread a soft cloth on a flat desk, and place the unit on it, with the LCD facing down Lens barrel Filter adaptor Remove the thread protector from the end part of the lens by turning it in the direction of arrow ••Gently hold the lens barrel with your fingers, and turn the thread protector with the opposite hand. Install the filter adaptor by turning it in the direction of arrow ••Gently hold the lens barrel with your fingers, and turn the filter adaptor with the opposite hand. - 203 - VQT4J11