Panasonic DMC-LZ5K Digital Still Camera-english/spanish - Page 81

• If you are connecting the camera to a PC for the first time, the required driver is installed automatically so that the camera can be recognized by Windows Plug and Play. The drive then appears on the [My Computer] folder. [Macintosh] The drive is displayed on the screen. • The drive is displayed as [LUMIX] when you connect the camera with no card inserted. • The drive is displayed as [NO_NAME] or [Untitled] when you connect the camera with a card inserted. ∫ Folder Composition Folders are displayed as shown in the following illustration. ≥Built-in memory ≥SD Memory Card ≥MultiMediaCard DCIM 100_PANA 1 100_PANA P1000001.JPG 23 P1000002.JPG P1000999.JPG 101_PANA 999_PANA MISC 1 Folder number 2 File number 3 JPG: pictures MOV: motion pictures The items in each folder are as follows. DCIM 100_PANA to 999_PANA MISC Folders from [100_PANA] to [999_PANA] Pictures/motion pictures Files on which the DPOF print settings are recorded Connecting to other equipment • The data for up to 999 pictures recorded by the camera can be included in 1 folder. If the number of pictures exceeds 999, another folder is created. • To reset the file number or the folder number, select [NO.RESET] in the [SETUP] menu. (P22) ∫ Conditions under which a different folder number is used In the following cases, the picture is not recorded in the same folder as the previously recorded picture. It is recorded in a folder with a new number. 1 When the folder just recorded to contains a picture file with the number 999 in it (example: P1000999.JPG). 2 When the card just recorded to contains, for example, a folder with the number 100 (100_PANA) in it and that card is removed and replaced with a card that has a folder with the number 100 in it recorded by a camera from a different maker (100XXXXX, with XXXXX being the name of the maker) and then a picture is recorded. 3 When recording after selecting [NO.RESET] (P22) from the [SETUP] menu. (Pictures will be recorded to a new folder with a number sequential to the folder recorded to immediately before. By using [NO.RESET] on a card that does not contain folders or pictures, such as one just formatted, the folder number can be reset to 100.) ∫ PictBridge (PTP) setting Even if you set [USB MODE] to [PictBridge (PTP)], you can connect to your PC if the OS is Windows XP Home Edition/ Professional or Mac OS X. • Pictures can only be read on the camera. They cannot be written to a card or deleted. • When there are 1000 or more pictures on a card, the pictures may not be imported. 81 VQT0U87