Panasonic DMC TS1 Digital Still Camera - Page 20
About the card/battery door. - will not turn on
UPC - 037988989294
View all Panasonic DMC TS1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Preparation ∫ About the card/battery door. If you turn on the power with the card/battery door open, a warning sound will go off in order to avoid immersion and the message shown below will appear on the LCD monitor. (P134) The camera cannot be operated when the card/battery door is open. (Only the ON/OFF button can be operated) Close it securely so no foreign object is clamped. • Messages are not displayed when the terminal cover is opened. Also, the camera can be operated, but close the cover securely so no foreign object enters before using the camera. If there is any foreign object, remove it with attached brush. BATTERY COVER OPEN CHECK THAT NO SAND, HAIR, OR OTHER OBJECTS ARE ON THE DOOR SEAL. ∫ Connecting the AC adaptor and multi conversion adaptor instead of the battery Always purchase the AC adaptor (DMW-AC5PP; optional) and the multi conversion adaptor (DMW-MCA1; optional) as a set. The AC adaptor (DMW-AC5PP; optional) cannot be used by itself. Also, read the instruction for the multi conversion adaptor (DMW-MCA1; optional) regarding the connection. 1 Open the terminal cover 2 Connect the camera with the multi conversion adaptor (DMW-MCA1; optional) • Ensure that only the AC adaptor (DMW-AC5PP; optional) and multi conversion adaptor (DMW-MCA1; optional) for this camera are used. Using any other equipment may cause damage. 3 Connect the AC cable to the AC adaptor and a wall outlet. 4 Connect the AC adaptor to the multi conversion adaptor. Note • Always use a genuine Panasonic AC adaptor (DMW-AC5PP; optional). • Always use a genuine Panasonic multi conversion adaptor (DMW-MCA1; optional). • For information about optional accessories, refer to the "Digital Camera Accessory System". (P150) 20 VQT1Z45