Panasonic DMC-TZ3S Digital Still Camera - Page 37

Available types vary depending on the mode in use. Available types in each mode (˕: default setting) SCENE MODE Cannot be used with MOTION PICTURE mode and scene modes or . Flash settings may be changed when changing recording mode. Scene mode flash settings are restored to default when scene mode is changed. Only or may be selected when using backlight compensation (P.28). Focus range according to ISO sensitivity ('SENSITIVITY') (P.51) and zoom (P.27). AUTO Max. W: Approx. 0.6-4.2 m (1.97-13.8 feet) Max. T: Approx. 1.0-2.8 m (3.28-9.19 feet) ISO100 ISO200 Max. W: Approx. 0.6-1.6 m (1.97-5.25 feet) Max. T: Approx. 1.0-1.1 m (3.28-3.61 feet) Max. W: Approx. 0.6-2.3 m (1.97-7.55 feet) Max. T: Approx. 1.0-1.5 m (3.28-4.92 feet) ISO400 Max. W: Approx. 0.6-3.3 m (1.97-10.8 feet) Max. T: Approx. 1.0-2.2 m (3.28-7.22 feet) ISO800 Max. W: Approx. 0.8-4.7 m (2.62-15.4 feet) Max. T: Approx. 1.0-3.1 m (3.28-10.2 feet) ISO1250 Max. W: Approx. 1.0-4.7 m (3.28-15.4 feet) Max. T: Approx. 1.0-3.1 m (3.28-10.2 feet) Edges of picture may become slightly dark if using flash at short distances without using zoom (close to max. W). This may be remedied by using a little zoom. Maximum ISO sensitivity ('ISO LIMIT') (P.51) and focus range when using Intelligent ISO (P.46). ISO400 Max. W: Approx. 0.6-3.3 m (1.97-10.8 feet) Max. T: Approx. 1.0-2.2 m (3.28-7.22 feet) ISO800/ISO1250 Max. W: Approx. 0.6-4.2 m (1.97-13.8 feet) Max. T: Approx. 1.0-2.8 m (3.28-9.19 feet) Note If flash is to be emitted, flash type marks (e.g. ) will turn red when shutter button is pressed halfway. No pictures may be taken if these marks (e.g. ) are flashing (flash is charging). Insufficient flash reach may be due to inadequately set exposure or white balance. Flash effect may not be fully achieved with high shutter speeds. Flash charging may take time if battery is low, or if using flash repeatedly. When using ECONOMY (P.20), LCD monitor is shut off while flash is charging. 37 VQT1B61