Panasonic DMC-ZR1K Digital Still Camera - Page 19

Press the shutter button halfway to focus., Press the shutter button fully push it in, further - case

Page 19 highlights

Basic 1 Press the shutter button halfway to focus. • The focus indication 1 (green) lights when the subject is focused. • The AF area 2 is displayed around the subject's face by the face detection function. In other cases, it is displayed at the point on the subject which is in focus. • The focus range is 3 cm (0.10 feet) (Wide)/1 m (3.28 feet) (Tele) to ¶. 2 Press the shutter button fully (push it in further), and take the picture. • The access indication lights red when pictures are being recorded on the built-in memory (or the card). • Do not turn this unit off, remove its battery or card, or disconnect the AC adaptor (DMW-AC5PP; optional) when the access indication is lit [when pictures are being written, read or deleted, or the built-in memory or the card is being formatted]. Furthermore, do not subject the camera to vibration, impact or static electricity. The card or the data on the card may be damaged, and this unit may no longer operate normally. If operation fails due to vibration, impact or static electricity, perform the operation again. 19 (ENG) VQT2G33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

19
(ENG) VQT2G33
Basic
Do not turn this unit off, remove its battery or card, or disconnect the AC adaptor
(DMW-AC5PP; optional) when the access indication is lit [when pictures are being
written, read or deleted, or the built-in memory or the card is being formatted].
Furthermore, do not subject the camera to vibration, impact or static electricity.
The card or the data on the card may be damaged, and this unit may no longer
operate normally.
If operation fails due to vibration, impact or static electricity, perform the
operation again.
Press the shutter button halfway to focus.
The focus indication
1
(green) lights when the subject
is focused.
The AF area
2
is displayed around the subject’s face
by the face detection function. In other cases, it is
displayed at the point on the subject which is in focus.
The focus range is 3 cm (0.10 feet) (Wide)/1 m
(3.28 feet) (Tele) to
.
Press the shutter button fully (push it in
further), and take the picture.
The access indication lights red when pictures are being
recorded on the built-in memory (or the card).
1
2