Panasonic DMCG5 Operating Instructions - Page 40

∫ Setup Menu This menu lets you perform the clock settings, select the operating beep tone settings and set other settings which make it easier for you to operate the camera. [Clock Set] Setting Date/Time. [World Time] Sets the times for the region where you live and your holiday destination. [Travel Date] Departure date and return date of the trip as well as the name of the travel destination can be set. [Beep] Set the volume for electronic noises and the electronic shutter noise. [Volume] Adjust the volume of the speaker to any of 7 levels. [LCD Display]/ [Viewfinder] Brightness, colour, or red or blue tint of the LCD monitor/Live Viewfinder is adjusted. [LCD Mode] The brightness of the LCD monitor can be adjusted depending on how bright it is around the camera. [Economy] Suppresses the unit power consumption to prevent the battery being run down. [USB Mode] Sets the communication method when connecting using the USB connection cable (supplied). [Output] This sets how the unit connects to a television etc. [VIERA Link] Equipment that supports the VIERA Link will connect automatically. [3D Playback] Set the output method for 3D pictures. [Menu Resume] Stores the location of the last-used menu item for each menu. [Rotate Disp.] This mode allows you to display pictures vertically if they were recorded holding the camera vertically. [Menu Background] Set the background colour for the menu screen. [Language] Set the language displayed on the screen. [Version Disp.] This enables the firmware versions of the camera and lens to be checked. [No.Reset] Returns the image file number to 0001. [Reset] The [Rec] or [Setup]/[Custom] menu settings are reset to the initial settings. [Pixel Refresh] It will perform optimisation of imaging device and image processing. 40 VQT4H04 (ENG)