Panasonic DMP-BD755 DMPBD75 User Guide - Page 11

Connections & Settings Network Easy Setting The configuration of your network is about to begin. Follow the on-screen instructions and make the settings with [3, 4, 2, 1] and press [OK]. Network Easy Setting The confirmation of a network connection and the Internet functions' (BD-Live etc.) accessibility is conducted. Is a LAN cable already connected ? Please refer to the operating instructions for how to connect to with a LAN cable. A broadband Internet connection is necessary for BD-Live. Press [OK] to proceed. OK RETURN When you experience problems with settings Network Easy Setting (Home Network Connection Check) Network Easy Setting (Home Network Connection Check) Complete. 1. LAN cable connection Fail 2. IP address setting Fail 3. Connection to gateway Fail LAN cable is not connected. Please check the connection. Select "Yes" and press [OK] to check network connection again. Select "No" and press [OK] to finish Network Easy Setting. Yes No OK Display 1. LAN cable connection 2. IP address setting 3. Connection to gateway 1. LAN cable connection 2. IP address setting 3. Connection to gateway 1. LAN cable connection 2. IP address setting 3. Connection to gateway Fail Fail Fail Pass Fail Fail Pass Pass or Home network available Fail Check the following ≥ Connection of the LAN cables ( 9) ≥ Connection and settings of the hub and router ≥ Settings of "IP Address/ DNS Settings" ( 24) Network Easy Setting (Internet Connection Check) Network Easy Setting (Internet Connection Check) Complete. - Connection to the Internet Fail(Error code: B019) Failed the connection test. Cannot find the server.(Error code: B019) Please refer to the owner's manual for the cause of the error and the solution for it. Press [OK]. OK Display Cannot find the server. (Error code: B019) Failed to connect to the server. (Error code: B020) Check the following ≥ "Primary DNS" and "Secondary DNS" settings of "IP Address/ DNS Settings" ( 24) ≥ The server may be busy or the service may have been suspended. Please wait a few moments, and then try again. ≥ Settings of "Proxy Server Settings" ( 24) and the router ≥ Refer to the operating instructions of the hub or router. ≥ You can perform this setup anytime by selecting "Network Easy Setting" in the Setup menu. ( 24) ≥ You can redo these settings individually using "Network Settings". ( 24) Reprogramming the remote control If you have more than one Panasonic player/recorder and the remote control operates both products at once, you will need to change the remote control code on one product to prevent this occurrence. ( 25, "Remote Control Code") 11 VQT3A92