Panasonic DMP-BDT270M Owner's Manual - Page 23

Settings Setup menu Change the unit's settings if necessary. The settings remain intact even if you switch the unit to standby. Some items are common to the Option menu. You can get the same effect with both menus. 1 Press [HOME]. ≥ [BD93] "Player Settings" (step 3) can be accessed directly by pressing [SETTINGS] button. 2 Press [OK] to select "Setup". 3 Select "Player Settings". [BDT270] Player Settings Video Audio 3D Language Network Ratings System Picture Mode Picture Adjustment HDMI Output OK RETURN Normal 4 Select an item and change the settings. To exit the screen Press [HOME]. Video ∫ Picture Mode (> 22) ∫ Picture Adjustment (> 22) ∫ HDMI Output Press [OK] to show the following settings: ¾ HDMI Resolution The items supported by the connected devices are indicated on the screen as "¢". When any item without "¢" is selected, the images may be distorted. ≥ If "Auto" is selected, the best suited output resolution to the connected TV is automatically selected. ≥ To enjoy high-definition video up-converted to 1080p, you need to connect the unit directly to 1080p compatible HDTV (High Definition TV). If this unit is connected to an HDTV through other equipment, the other equipment must also be 1080p compatible. [BDT270] ¾ 24p(4K)/24p Output This setting is for selecting the output method for content recorded in 24p*1, such as movies. 24p(4K) Outputs signals by upconverting them to 4K*2. 24p Outputs in 24p. ≥ Connect the compatible TV for each (4K or 1080/24p) output to the HDMI AV OUT terminal of this unit. ≥ "24p(4K)" works only when playing back in 2D. ≥ When playing DVD-Video, set this setting to "24p(4K)" or "24p", and then "24p" in "Video Settings" (> 22) to "On". ≥ When BD-Video/DVD-Video images other than 24p are played, images are output at 60p. - 23 -