Panasonic DMP-BDT460 DMP-BDT460 Owner's Manual (English) - Page 32

A black band is displayed around the edge of the screen. The aspect ratio of the screen is abnormal. ¾ Confirm the "TV Aspect" is set properly. (> 28) ¾ Adjust the aspect setting on the TV. Audio Cannot switch audio. ¾ The audio cannot switch, if "Digital Audio Output" is set to "Bitstream". Set "Digital Audio Output" to "PCM". (> 25) Cannot hear the desired audio type. ¾ Check the connections and the "Digital Audio Output" settings. (> 9, 25) ¾ [BDT460] : When connecting this unit to a TV via an HDMI AV OUT MAIN and to an amplifier/receiver via an HDMI AV OUT SUB, set "HDMI(SUB) Output Mode" to "V.OFF". (> 10) ¾ To output audio from a device connected with an HDMI cable, set "HDMI Audio Output" to "On" in the Setup menu. (> 25) There is no sound coming out from the TV. [BDT460] ¾ Audio may not output from the TV when the amplifier/receiver is connected to the HDMI AV OUT SUB, and "HDMI(SUB) Output Mode" (> 25) is set to "V.OFF". In such a case, output audio from the amplifier/receiver. To output audio from the TV, set the "HDMI(SUB) Output Mode" to "Normal". Playback Disc cannot be played. ¾ The disc is dirty. (> 5) ¾ The disc is not finalized. (> 7) ¾ Confirm the "Mixed Data Disc Option" is set properly. (> 28) Still pictures (JPEG) do not play back normally. ¾ The images that were edited on the PC, such as Progressive JPEG, etc., may not be played back. I can't play back BD-Live. ¾ Confirm that this unit is connected to the broadband Internet. (> 11) ¾ Connect this unit to the network by a wired connection. ¾ Confirm the "BD-Live Internet Access" settings. (> 27) ¾ Confirm a USB device is connected to the USB port. (> 14) Network I can't connect to the network. ¾ Confirm the network connection and settings. (> 11, 12, 26) ¾ There may be interference that prevents the unit from detecting your home network. Place the unit and the wireless router closer to each other. This unit may be able to detect your network name (> 13, "SSID"). ¾ Check the owner's manuals for each device and connect accordingly. When using wireless LAN connection, video from the DLNA Certified media server is not played back or video frames are dropped during playback. ¾ Higher transfer rate router such as 802.11n (2.4 GHz or 5 GHz) wireless router may solve the problem. If you use 802.11n (2.4 GHz or 5 GHz) wireless router, it is necessary to set the encryption type to "AES". Simultaneous use with a microwave, cordless telephone etc. at 2.4 GHz may result in connection interruptions or other problems. ¾ On the "Wireless Settings" screen (> 26), the continuous lighting of at least 4 "Reception" indicators is the target for a stable connection. If 3 or fewer indicators are lit or the connection is being interrupted, change the position or angle of your wireless router and see if the connection state improves. If there is no improvement, connect to a wired network and perform the "Easy Network Setting" (> 12) again. 32 SQT0080