Panasonic DMP-UB400 Owners Manual - Page 17

Getting started Settings The following settings can be performed anytime in the Setup menu. (> 32, 34) Easy Setting After connecting your new player for the first time and pressing [Í], the basic settings screen will appear. Preparation Turn on the TV and select the appropriate video input. 1 Press [Í]. Setup screen appears. 2 Follow the on-screen instructions to continue with the settings. (e.g., "Quick Start") ≥ Certain recent models of Panasonic TVs (VIERA) may automatically apply their language setting to this unit. ∫ When connected to a 4K/60p-compatible TV When connected to a 4K/60p-compatible TV, you can set the video output format. 4K60p Output Press OK to start the connection check with your 4K TV. Do not operate this unit during connection check. Notice: Connection check might take up to 30 seconds and video might appear distorted. Start OK RETURN Follow the on-screen instructions to set the format. ≥ To reconnect this unit to a 4K/60p-compatible TV after connecting this unit to a 2K-compatible TV and completing "Easy Setting", set "4K60p Output" to "4K/60p(4:4:4)" or "4K/60p(4:2:0)". (> 29) Easy Network Setting After completing "Easy Setting", you can perform "Easy Network Setting". Follow the on-screen instructions to establish your connection settings. e.g., [UB400] Select "Wired" or "Wireless" and press [OK]. Easy Network Setting Select a connection mode. Wired Wireless OK RETURN [UB400] ∫ About the wireless connection To obtain your network name (SSID*1) and encryption key (password). The default settings may be e.g. printed on the router. If the SSID and password have been SSID XXXXXXXXXXXX KEY XXXXXXXXXXXX PIN XXXXXXXXX changed, consult the person responsible for setting up your network. For more details, refer to the manual supplied with the wireless broadband router, or contact your Internet provider. If your SSID is not displayed; Search again by pressing the red button on the remote control. Wireless Settings Select a wireless network for connection. Press the green button to connect via PUSH button method. Network name (SSID) XXXXXXXXXX XXXXXXXXXX XXXXXXXXXX XXXXXXXXXX XXXXXXXXXX XXXXXXXXXX XXXXXXXXXX Reception Search again OK RETURN PUSH button - 17 -