Panasonic DMR-ES45VS Dvd Recorder-english/spanish - Page 63

Changing the unit's settings Common procedures Use the following procedure to change the settings if necessary. [1] While stopped Press [FUNCTIONS]. No Disc FUNCTIONS No Disc [2] Select "Other Functions" with [3, 4] and press [ENTER]. [3] Select "Setup" with [3, 4] and press [ENTER]. Program Copy Other Functions ENTER RETURN (1) (2) (3) (1) Menus (2) Items (3) Options Setup Channel Setup Disc Video Audio Display TV Screen VHS Off Timer Remote Control Code Clock Settings Quick Start Restore Default Settings 6 Hours Set Code 1 On ENTER [4] Select a menu with [3, 4] and press [2, 1]. [5] Select an item to be changed with [3, 4] and press [ENTER]. [6] Select an option with [3, 4] and press [ENTER]. ≥Some options require different operations. Follow the displayed instructions. ∫ To return to the previous screen Press [RETURN]. Even if you have changed an option, the change is not activated until you press [ENTER]. ∫ To exit the screen Press [RETURN] several times. For your reference ≥The settings remain intact even if you switch the unit to standby. Entering a password (Ratings) You can limit play of DVDs unsuitable for some audiences (children, for example). Play and changes to the settings are not possible unless you enter a password. Preparation ≥Select DVD side with pressing [DRIVE SELECT]. When setting ratings The password screen is shown when you select levels 0 to 7. [1] Input a 4-digit password with the numeric buttons. ≥If you enter a wrong number, press [2] to erase it before you press [ENTER]. ≥Do not forget your password. [2] Press [ENTER]. [3] Press [ENTER]. The password is entered and the unit is locked. Now, when you insert a DVD-Video that exceeds the ratings limit you set, a message appears on the TV. Follow the on-screen instructions. When changing ratings The password screen is shown when you select "Ratings" (l 64) [1] Input a 4-digit password with the numeric buttons and press [ENTER]. Unlock Recorder: To unlock the unit and return the rating to 8 Change Password: To change your password Change Level: To change the rating level Temporary Unlock: To temporarily unlock the unit (the unit locks again if you switch it to standby or open the disc tray) [2] Select a desired item with [3, 4] and press [ENTER]. Actual screens depend on the operation. Follow the on-screen instructions. Summary of settings This description shows the initial settings for the unit. For details on menu operation. (l left) ≥Underlined items are the factory default settings. ≥ VHS. ≥ / indicates settings effective for both DVD and indicates settings effective for DVD only. ≥ indicates settings effective for VHS only. ∫ Channel / Signal Source (RF IN) (l 19) Select to suit the type of antenna you are using. [Antenna] [CableTV] Set Channels Automatically (l 19) Preset Channel Captions (l 20) Manual Channel Captions (l 20) ∫ Setup / Off Timer Select how long the unit remains on when it is not being used. [2 Hours] [6 Hours] [Off] Remote Control Code (l 21) [Set Code 1] [Set Code 2] [Set Code 3] Clock Settings Press [ENTER] to show the following settings. Set Clock Automatically (l 22) Set Clock Manually (l 19) Adjust Time Zone (l 22) This corrects the time set in Auto Clock Setting. The status is not displayed on the Setup menu when the Auto Clock Setting is not set. [j1] [0] [i1] Quick Start 1 Sec. Quick Start for Recording on DVD-RAM° ° From the power off state, recording on DVD-RAM starts about 1 second after first pressing the [Í, DVD/VHS POWER] and then sequentially pressing the [¥, REC] (Quick Start Mode). Power consumption is also higher when the unit is turned off if this is set to "On". [On] [Off] Restore Default Settings This returns Setup menus to default settings, except for the clock, channel settings, ratings level, and on-screen language. [Yes] [No] 63 RQTV0141 DVD and card Management/Changing the unit's settings