Panasonic DVD-S1S DVDS1 User Guide - Page 15
REFERENCE, TROUBLESHOOTING GUIDE, Power, No operation, Picture incorrect, Progressive video
View all Panasonic DVD-S1S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Troubleshooting guide Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the "Customer Services Directory" on page 17. (Reference pages are shown in parentheses.) Power No power. The unit is automatically switched to the standby mode. • Insert the AC power supply cord securely into the household AC outlet. (7) • When "AUTO POWER OFF" is set to "ON", the unit automatically switches to standby after approximately 30 minutes in the stop mode. (14) No operation No response • This unit cannot play discs other than the ones listed in when any buttons pressed. these operating instructions. (5) • The unit may not be operating properly due to lightning, static electricity or some other external factor. Turn the unit off and then back to ON. Alternatively, turn the unit off, disconnect the AC power supply cord, and then reconnect it. • Condensation has formed: Wait 1 to 2 hours for it to No response when remote control buttons pressed. evaporate. • Check that the batteries are installed correctly. (7) • The batteries are depleted: Replace them with new ones. (7) • Point the remote control at the remote control sensor and operate. (8) • When using On-Screen Menus, press [w q] to select the item, then press [e r] to make the settings. (12) No picture or sound. • Check the video or audio connection. (6, 7) • Check the power or input setting of the connected equipment. You have forgotten • While stopped, remove the disc, and then press and hold your ratings [q] (PLAY) and [; OPEN/CLOSE] on the unit and then also password. press and hold [8 POWER] on the unit until "INITIALIZED" Reset all the settings disappears from the television. Turn the unit off and on to Factory Preset. again. All settings will return to the default values. Specific operation impossible or incorrect It takes time before play starts. The program functions do not work. Menu doesn't appear. VCD with playback control Play doesn't start. • Play may take time to begin when an MP3 track has still picture data. Even after the track starts, the correct play time will not be displayed, however this is normal. • These functions do not work with some DVD-Videos. • Press [g] twice and then press [q] (PLAY). • If a disc contains CD-DA and other formats, proper playback may not be possible. Troubleshooting guide No subtitles. • Display the subtitles. (12) The subtitles • Clear the subtitles. (12) overlap closed captions recorded on discs. In A-B Repeat, point • The end of an item becomes point B when it is reached. B is automatically set. Repeat play is automatically • A-B Repeat is canceled when you press [QUICK REPLAY]. • Repeat play may be canceled when you press [CM SKIP]. canceled. Picture incorrect Picture distorted. • Ensure that the unit is not connected through a video cassette recorder. (6) • Make sure that progressive output has not been selected when the connected television is not progressive compatible. Press and hold [RETURN] until the picture displays correctly. The settings will return to "INTERLACE". Picture size doesn't • Change "TV ASPECT" in "VIDEO" tab. (13) fit the screen. • Use the television to change the aspect. If your television does not have that function, change "TV ASPECT". (13) • Change the zoom setting. (10) The television may • PAL discs cannot be played. display incorrectly or colors appear faded. Menu not displayed • Restore the zoom ratio to "NORMAL". (10) correctly. • Change "TV ASPECT" in "VIDEO" tab. (13) Progressive video There is ghosting • This problem is caused by the editing method or material when progressive used on DVD-Video, but should be corrected if you use output is on. interlace output. Change "VIDEO OUT (I/P)" in "VIDEO" tab Pictures not in to "INTERLACE". (13) • If the unit is connected to the television through VIDEO OUT progressive output. or S VIDEO OUT, output will be interlace. Closed captions not • When progressive output is on, closed captions will not be displayed. displayed. RQTC0074 15