Panasonic EAH-AZ70W Owners Manual - Page 17

Preparation Connecting a Bluetooth® device Preparation • Put the earphones into the charging cradle. • Place the Bluetooth® device within approx. 1 m (3.3 ft) from the unit. • Check the device operation using its operation instructions as required. • Using the "Technics Audio Connect" app (free of charge) makes connecting with Bluetooth® simple. (l 16) Connecting by pairing (registering) your earphones with a Bluetooth® device 1 Take both earphones (L and R) out of the charging cradle. • When pairing with a device for the first time: This unit will start to search for a Bluetooth® device to connect to, and the earphone LEDs will light alternately in blue and red. • When pairing with a device after the first time: Both earphones should be placed temporarily in the charging cradle for 10 seconds. After that remove them from the cradle and within 5 seconds while the LED is lit BLUE, touch and hold the sensor (L or R) for 7 seconds until the LED starts flashing Red/Blue, indicating that you have entered the pairing mode. 2 Turn on the Bluetooth® device and enable the Bluetooth® function. 3 From the Bluetooth® menu of the Bluetooth® device, e.g. select device name "EAH-AZ70W". • A BD address (Bluetooth® Device address: an alphanumeric character Bluetooth string that is displayed by and unique to the device) may be displayed before "EAH-AZ70W" is displayed. • If prompted for a passkey, input the passkey "0000 (four zeros)" of this unit. Bluetooth ON Device EAH-AZ70W Select • When the earphone LEDs blink (blue)* twice at approximately 5 second intervals, pairing has been completed and connection has been established. * The batteries are low when they are blinking in red. 4 Confirm that the earphones and the Bluetooth® device are connected. Note • If the connection with the device does not complete within 5 minutes, the pairing mode on the earphones cancels and they transition to connection standby mode. Perform pairing again. • You can pair a maximum of 10 Bluetooth® devices with the earphones. When you pair a device after the maximum has been exceeded, previous devices are overwritten. To use overwritten devices again, do the pairing again. 17