Panasonic EP-MA10 Operating Instructions Multi-lingual - Page 13

Attaching the control panel stand to the right armrest

Page 13 highlights

English 2 Fasten the armrest with the attachment screws. Set the two attachment screws in place with the allen key first and then tighten firmly. Attachment Screws (M6 × 16) Right armrest - 2 pcs. Left armrest - 2 pcs. Back Turn screws clockwise to tighten. Attachment Screw Allen key Front Attachment Screw Allen key How to tighten the screws Hole Allen key • Put an attachment screw on the edge of the allen key and tighten the screw horizontally to the hole. • Screw may be damaged if you tighten the screw inserted into the hole crookedly using an allen key. 2. Attaching the control panel stand to the right armrest 1 Insert the attachment screw into the lower holes first and then tighten lightly with the allen key. 2 Securing the stand with the attachment screws. • Tighten the two screws for the remaining two holes lightly with the allen key and then tighten firmly. Attachment Screws (M6 × 16) 4 pcs. Control panel stand Attachment screw Allen key How to tighten the screws Hole Allen key • Put an attachment screw on the edge of the allen key and tighten the screw horizontally to the hole. • Screw may be damaged if you tighten the screw inserted into the hole crookedly using an allen key. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27

12
English
2
Fasten the armrest with
the attachment screws.
Set the two attachment screws in
place with the allen key first and
then tighten firmly.
Attachment Screws (M6 × 16)
Right armrest — 2 pcs.
Left armrest — 2 pcs.
Attachment Screw
Allen key
Turn screws clockwise
to tighten.
Allen key
Attachment Screw
Back
Front
How to tighten the screws
Allen key
Hole
Put an attachment screw on the edge of the allen key and tighten the screw
horizontally to the hole.
Screw may be damaged if you tighten the screw inserted into the hole crookedly
using an allen key.
2. Attaching the control panel stand to the right armrest
1
Insert the attachment screw into the
lower holes first and then tighten
lightly with the allen key.
2
Securing the stand with the
attachment screws.
Tighten the two screws for the remaining two holes lightly
with the allen key and then tighten firmly.
Attachment Screws (M6 × 16)
4 pcs.
Control panel stand
Attachment screw
Allen key
How to tighten the screws
Allen key
Hole
Put an attachment screw on the edge of the allen key and tighten the screw
horizontally to the hole.
Screw may be damaged if you tighten the screw inserted into the hole crookedly
using an allen key.