Panasonic EP30005TU EP30005TU Owner's Manual (English) - Page 14
When removing the control panel stand cover, Raising the backrest to the, upright position
View all Panasonic EP30005TU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
When removing the control panel stand cover 1. Insert the head of a flat-tip screwdriver in the gap under the mark (O). 2. Push the bottom tab of the cover up to lift the cover. 3. Perform the same procedures as 1 and 2 above for the other gap. 4. Pull the cover up diagonally. • Performing this procedure with the allen key or a Phillips screwdriver could damage the unit. Gap 2 1 2 5 Raising the backrest to the upright position 1. Insert the power plug into the power outlet. 2. Confirm the key lock is set to the "open" position. 3. Confirm the power switch is set to the "on" position. 4. Press the button on the control panel twice. The backrest will rise to the upright position automatically. Flat-tip screwdriver (Not included in the standard configuration) 13