Panasonic EPS-1200CSP Turntable - Page 9
Adjustments while using the unit, Pitch control, Adjusting the turntable brake speed
View all Panasonic EPS-1200CSP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Adjustments while using the unit Pitch control Fine adjustment to the number of revolutions per minute. 1 Press [reset] to turn off the green LED light. Green LED indicator Pitch control Adjusting the turntable brake speed Brake speed can be adjusted by pressing [start-stop] until the turntable stops. Use a small screwdriver in the hole on the turntable to adjust the brake speed. S: Slow stop F: Fast stop S BRAKE F reset 2 Slide [pitch adj.] while the turntable is revolving. Move the control to the required position. •The numbers represent approximate percentages. •Pitch can be adjusted between -8 % and +8 %. To reset pitch to the preset value Press [reset]. The green LED indicator lights and the pitch immediately returns to the set value (33 1/3 or 45 r/min), regardless of any adjustments made with [pitch adj.]. Press [reset] again and pitch returns to the adjusted value. To measure pitch The four rows of strobe mirrors around the edge of the turntable can assist you in measuring pitch. +6.4 % change in pitch when stationary +3.3 % change in pitch when stationary Normal turntable speed when stationary _3.3 % change in pitch when stationary They are lit by the strobo light as they pass and each row appears to stand still at a different pitch. Strobo light power Read the pitch control slider replacement instructions that comes with this product carefully when replacing the pitch control slider. off on 9 RQT7018