Panasonic ER-GB80-S Operating Instructions - Page 9

 English Charging the trimmer • Make sure that the trimmer is turned off. 1 Connect the appliance plug to the appliance socket. 2 Plug in the adaptor into a household outlet. ••Check that the charge status lamp glows. 2 ••Charging is completed after approx. 1 1 hour. 3 Disconnect the adaptor when the charge status lamp stops glowing. ••Recommended ambient temperature for charging is 0 - 35 °C (32 - 95 °F). Battery performance may decrease under extremely low or high temperatures, and the battery may not be charged properly. ••A full charge supplies enough power for approximately 50 minutes of use. The operating time may differ depending on the frequency of use, the operating method and the ambient temperature. ••When charging the trimmer for the first time or when it has not been in use for more than 6 months, the lamp on the main body may not glow for a few minutes, or the operating time may shorten. Please charge it for more than 8 hours in such cases. ••If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration. AC operation If you connect the AC adaptor to the trimmer in the same way as for charging, and turn on the power, you can use it. • If the remaining battery is too low, the blades may move slowly or stop, even with the AC operation. In this case, charge the battery for 1 minute or more. • The battery will be discharged, even with the AC operation. Using the trimmer • Make sure that the trimmer is turned off. • We recommend using the trimmer in an ambient temperature range of 0 - 35 °C (32 - 95 °F). If used outside this range, the appliance may stop operating. 1 Mount the desired comb attachment and adjust the trimming height as needed. (See page 10.) ••It can also be used without the comb attachment. (Trimming height: approx. 0.5 mm (1/64˝)) ••Actual hair length will be a little longer than the height you set. 2 Press the power switch to turn on the power. 9