Panasonic ER-SC40 Operating Instructions Multi-lingual - Page 11

English Locking/unlocking the power switch ►►Locking the power switch 1. Press for more than 2 seconds. ••The switch lock lamp ( ) will light up for 5 seconds and turn off. ••The appliance will stop operating. 2. Release . ►►Unlocking the power switch 1. Press for more than 2 seconds. ••The switch lock lamp ( ) will turn off. 2. Once the appliance starts operating, release . Removing and mounting the attachments • Take care not to injure hands, etc., with the blade when removing or mounting the attachment. • Turn the appliance off. ►►Mounting the attachment Mount the attachment to the main body until it clicks. • If the attachment is not attached correctly, it may shift and end up cutting too much during use. click ►►Removing the attachment Hold the main body securely and remove the attachment from the main body. AC operation If you connect the AC adaptor to the appliance in the same way as for charging, and turn on the power, you can use it. • If the remaining battery is too low, the blades may move slowly or stop, even with the AC operation. In this case, charge the battery for 1 minute or more. • The battery will be discharged, even with the AC operation. ER-SC40_CAN.indb 11 11 2017/07/18 17:46:27