Panasonic ES-LA63 Operating Instructions Multi-lingual - Page 15

Replacing the system outer foil and, the inner blades - replacement parts

Page 15 highlights

English 4 Dry the outer foil section, the shaver, and the trimmer completely. ••Allow the shaver to dry in the shade, avoid direct sunlight. 5 Lubricate the shaver. It will keep the movement of the blade smooth and maintain a comfort shave. 1. Apply one drop of oil to each of the system outer foils. 2. Raise the trimmer and apply a drop of oil. 3. Switch the shaver on, and run it for approximately 5 seconds. 4. Switch off the shaver, and wipe off any excess oil from the system outer foil with a soft cloth. Notes ••Be careful not to hit the main body on the sink or any other object while draining the water. Failure to do so may cause malfunction. ••Do not wipe with thinners, benzine, alcohol etc. Doing so may cause malfunction, or cracking or discoloration of the parts. Wipe with diluted soapy water. ••Do not use any kitchen or bathroom detergents other than hand soap. Doing so may cause malfunction. Cleaning with the brush ►►Cleaning with the long brush Clean the foil frame, system outer foil, the main body and the trimmer using the long brush. ►►Cleaning with the short brush ••Clean the inner blades using the short brush by moving it in direction as illustrated. ••Do not move the short brush perpendicularly against the blades as it will damage the inner blades and affect their sharpness. Replacing the system outer foil and the inner blades system outer foil inner blades once every year once every two years ►►Removing the outer foil section Press the foil frame release buttons and lift the outer foil section upwards. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

15
English
4
Dry the outer foil section, the
shaver, and the trimmer
completely�
• Allow the shaver to dry in the
shade, avoid direct sunlight.
5
Lubricate the shaver�
It will keep the movement of
the blade smooth and
maintain a comfort shave.
1. Apply one drop of oil to
each of the system outer
foils.
2. Raise the trimmer and apply a drop of oil.
3. Switch the shaver on, and run it for approximately
5 seconds.
4. Switch off the shaver, and wipe off any excess oil
from the system outer foil with a soft cloth.
Notes
• Be careful not to hit the main body on the sink or any
other object while draining the water. Failure to do so
may cause malfunction.
• Do not wipe with thinners, benzine, alcohol etc.
Doing so may cause malfunction, or cracking or
discoloration of the parts.
Wipe with diluted soapy water.
• Do not use any kitchen or bathroom detergents other
than hand soap.
Doing so may cause malfunction.
Cleaning with the brush
Cleaning with the long brush
Clean the foil frame, system
outer foil, the main body
and the trimmer using the
long brush.
Cleaning with the short brush
• Clean the inner blades using
the short brush by moving it in
direction as illustrated.
• Do not move the short brush
perpendicularly against the
blades as it will damage the inner
blades and affect their sharpness.
Replacing the system outer foil and
the inner blades
system outer foil
once every year
inner blades
once every two years
Removing the outer foil section
Press the foil frame release buttons and lift
the outer foil section upwards.