Panasonic H1 Hd Video Camera - English / Spanish - Page 103
CONNECTION AND RECOGNITION, procedures
UPC - 092281893006
View all Panasonic H1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
With a computer Connection and recognition Connection and recognition procedures ≥If the recognition procedure is not accomplished properly, operation will not be possible after connecting the unit to the computer. ≥If the unit fails to operate normally it may mean that the correction procedure was not conducted properly. 1 Connect this unit to the AC adaptor. ≥If a battery is used, operation is not possible when this unit is connected to a computer. 2 Insert an SD card with recorded images in this unit and then set the mode dial to PC to turn on the power. PC A USB cable (supplied) This unit is automatically recognized by the computer. ≥Insert the plugs as far as they will go. The unit and computer will not operate properly if the plugs are not inserted fully. ≥Do not use any other USB connection cables except the supplied one. (Operation is not guaranteed with any other USB connection cables.) ≥When the unit is connected to a computer, the operation mode cannot be changed and its power cannot be turned off. In this case, disconnect the USB cable. (l 105) ≥When this unit is connected to a computer, you cannot use this unit's DISC EJECT lever to remove a disc. ≥When a computer is accessing the SD card in this unit, the card access lamp lights. (When a card is being accessed, appears on the LCD monitor.) Do not disconnect the USB cable or AC adaptor while the disc or card is being accessed as it may damage the data. ≥It may be necessary to reboot the computer after connecting this unit to it for the first time. OFF 3 Connect this unit and a computer. A 103 LSQT1093