Panasonic H1 Hd Sd Camcorder - Multi Language - Page 50
Quick power
UPC - 092281893006
View all Panasonic H1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
3 Open the LCD monitor or extend the viewfinder. HDC-TM300 HDC-HS300 Quick power on (Only when recording to an SD card or built- in memory) The unit is put into recording pause approx. 1.9 seconds when the mode is set to or from OFF. ≥ Start time will not shorten if there is no SD card inserted. Start time will be shorten if the [Built-in Memory] is selected in the [MEDIA SELECT], even if there is no SD card inserted. ¬ Change the mode to or . 1 Select SD card as a media to record from the menu. (l 33) [MEDIA SELECT] # [SD CARD] The status indicator A lights red and the unit is put into recording pause. ≥ Quick Start Standby Mode is canceled if jabout 5 minutes have elapsed jmode is set to junit is turned off ≥ Time for Quick Start will be more than 0.6 seconds slower when the digital cinema is used. ≥ Depending on the recording conditions, time for Quick Start may be more than 0.6 seconds slower in Still Picture Recording Mode. ≥ It may take some time for Automatic White Balance to adjust. ≥ In the Quick Start Mode, the zoom magnification becomes 1k. ≥ If [ECONOMY] (l 36) is set to [5 MINUTES] and the unit automatically goes into Quick Start Standby Mode, close the LCD monitor and then open it again. ≥ Quick Start Standby Mode cannot be released by the remote control. Turn the mode to OFF when powering off. 2 Select the menu. (l 33) [SETUP] # [QUICK POWER ON] # [ON] ≥ This function's default setting is [ON]. ≥ Depending on the recording conditions, start time may be longer than 1.9 seconds in Still Picture Recording Mode. ≥ In the Quick Power on Mode, the zoom magnification becomes 1k. 50 VQT1Z09