Panasonic HC-MDH3 Basic Owners Manual - Page 10
About Condensation - avchd
![]() |
View all Panasonic HC-MDH3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
≥ The customer is responsible for the management of the data in the SD card. LCD monitor/viewfinder ≥ When the LCD screen is dirty or condensation has occurred, please wipe it using a soft cloth such as a lens cloth. ≥ Do not touch the LCD monitor with your finger nails, or rub or press with strong force. ≥ It may become hard to see or hard to recognize the touch when the LCD protection sheet is affixed. ≥ When the unit has become very cold, for example due to storage in a cold area, its LCD monitor will be slightly darker than usual immediately after the unit is turned on. The normal brightness will be restored when the unit's internal temperature rises. Extremely high precision technology is employed to produce the LCD Monitor screen. The result is more than 99.99% effective dots with a mere 0.01% of the dots inactive or always lit. However, this is not a malfunction and does not affect the recorded picture. Extremely high precision technology is employed to produce the viewfinder screen. The result is more than 99.99% effective dots with a mere 0.01% of the dots inactive or always lit. However, this is not a malfunction and does not affect the recorded picture. ∫ About the recording method for recording motion pictures This unit can record motion pictures using three different recording methods, including MOV, MP4 and AVCHD*. * AVCHD Progressive (1080/60p) supported. MOV and MP4: These recording methods are suitable for editing images. Audio is recorded in linear PCM. ≥ Those methods are not compatible with motion pictures recorded in AVCHD format. AVCHD: This recording method is suitable for playback on a high-definition TV. Audio is recorded in Dolby Audio™. ∫ Indemnity about recorded content Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content, and does not guarantee any content if recording or editing does not work properly. Likewise, the above also applies in a case where any type of repair is made to the unit. ∫ About Condensation (When the lens, the viewfinder or LCD Monitor is fogged up) Condensation occurs when there is a change in temperature or humidity, such as when the unit is taken from outside or a cold room to a warm room. Please be careful, as it may cause the lens, the viewfinder or LCD monitor to become soiled, moldy, or damaged. When taking the unit to a place which has a different temperature, if the unit is accustomed to the room temperature of the destination for about one hour, condensation can be prevented. (When the difference in temperature is severe, place the unit in a plastic bag or the like, remove air from the bag, and seal the bag.) When condensation has occurred, remove the battery and/or the AC adapter and leave the unit like that for about one hour. When the unit becomes accustomed to the surrounding temperature, fogginess will disappear naturally. 10 DVQX1481 (ENG)
![](/manual_guide/products/panasonic-hcmdh3-basic-owners-manual-c9f88da/10.png)