Panasonic HC-V250 HC-V250K Advanced Features Manuals (English) - Page 52

Endless Loop Recording ≥ Insert an SD card. ≥ Change the Recording Mode to . (l 43) 1 Select sound in loop recording setting. [ON]: Records sound. [OFF]: Recording of sound is off. 2 Start recording. ≥ Once you start recording, the scene will be automatically divided every 2 minutes. The divided scenes will be saved in the SD card. (Each time you use Endless Loop Recording, a set of up to 30 scenes will be saved.) ≥ When the period between the time you start recording and the time you stop recording is longer than 1 hour (approximate), only the last 1 hour (approximate) part up to the end of the recording will be saved. The part before the 1 hour part will be deleted. ≥ Recording stops automatically when approximately 24 hours have passed since the start of the recording. ≥ During recording, the blinks. ≥ The remaining recordable time and elapsed recording time are not displayed. (l 22) ≥ Only when sound in loop recording is set to [ON], (microphone input level meter) is displayed. To switch sound in loop recording The menu can be set to switch to sound in loop recording. MENU : [RECORD SETUP] # [Sound In Loop Recording] # [ON] or [OFF] ≥ Still pictures cannot be taken. ≥ [REC FORMAT] is set to [MP4/iFrame], and [REC MODE] is set to [720]. ≥ HC-V550 Image Stabilizer Function is set to (setting canceled) and Level Shot Function is set to off. HC-V250 Image Stabilizer Function is set to (setting canceled). ≥ Endless Loop Recording is not possible in the following cases: j When the SD card is not inserted j When the approximate remaining recordable time on the SD card is less than 1 hour (The time between R 0h00m and R 0h59m flashes red.) ≥ Since each set of loop-recorded scenes is displayed separately on the date list, it is convenient to play back loop-recorded scenes by date. (l 82) (The date displayed on the date list will be the one on which you started Endless Loop Recording.) - 52 -