Panasonic HC-V750K HC-V750K Owner's Manual (English) - Page 27

If the Wi-Fi connection cannot be established

Page 27 highlights

Feature [Copy] [Live Cast] [History] Description of functions By setting up a Wi-Fi communication between this unit and a PC, you can copy scenes and still pictures recorded with this unit to the PC. You can broadcast motion pictures of this unit live by setting up a link between the "LUMIX CLUB" and USTREAM. Each use of a Wi-Fi function is stored in the Wi-Fi connection history. Connecting from the history allows you to easily set up a connection using the previous connection settings. If the Wi-Fi connection cannot be established Problem It cannot connect to the wireless access point. The wireless access point is not detected. Radio waves of the wireless access point get disconnected. Check points (General) ≥ Turn ON the wireless access point. ≥ Approach the wireless access point and reconnect. ≥ If it takes time to complete the connection, the Wi-Fi connection will be aborted. Reset the connection settings. ≥ Check how to connect to the wireless access point and how to set the security settings. ≥ Make sure the wireless access point is registered in this unit. ≥ The device may be unable to locate the wireless access point due to problems with the signal. Use [Manual Setting]. ([WPS Connection]) ≥ Make sure the wireless access point is in the correct WPS standby mode. ≥ Make sure the PIN code has been correctly input. ([Search for wireless network] or [Manual Setting]) ≥ Make sure the SSID and Password have been correctly input. ≥ Check the Authentication method, Encryption type, and Encryption key (Password). ≥ The condition may improved by moving the location or changing the angle of the wireless access point. ≥ If you use another 2.4 GHz band device such as a microwave oven or cordless telephone nearby, you may interrupt the signal. Keep a sufficient distance from these types of devices. 27 (ENG) SQT0142

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

27
(ENG) SQT0142
If the Wi-Fi connection cannot be established
Feature
Description of functions
[Copy]
By setting up a Wi-Fi communication between this unit
and a PC, you can copy scenes and still pictures
recorded with this unit to the PC.
[Live Cast]
You can broadcast motion pictures of this unit live by
setting up a link between the “LUMIX CLUB” and
USTREAM.
[History]
Each use of a Wi-Fi function is stored in the Wi-Fi
connection history. Connecting from the history allows
you to easily set up a connection using the previous
connection settings.
Problem
Check points
It cannot connect
to the wireless
access point.
The wireless
access point is not
detected.
(General)
Turn ON the wireless access point.
Approach the wireless access point and reconnect.
If it takes time to complete the connection, the Wi-Fi connection will be
aborted.
Reset the connection settings.
Check how to connect to the wireless access point and how to set the
security settings.
Make sure the wireless access point is registered in this unit.
The device may be unable to locate the wireless access point due to
problems with the signal. Use [Manual Setting].
([WPS Connection])
Make sure the wireless access point is in the correct WPS standby
mode.
Make sure the PIN code has been correctly input.
([Search for wireless network] or [Manual Setting])
Make sure the SSID and Password have been correctly input.
Check the Authentication method, Encryption type, and Encryption
key (Password).
Radio waves of the
wireless access
point get
disconnected.
The condition may improved by moving the location or changing the
angle of the wireless access point.
If you use another 2.4 GHz band device such as a microwave oven or
cordless telephone nearby, you may interrupt the signal. Keep a
sufficient distance from these types of devices.