Panasonic HC-VXF1 Advanced English Operating Manual - Page 231

To use the Wireless Multi-Camera function To use the last connected smartphones 1 Press Wi-Fi button on this unit and touch [Multi Camera]. 2 Touch [ENTER]. 1/2  A [Multi Camera] B [EXIT] 3 Start up the smartphone application "Image App". ≥ This unit and the smartphone will be connected via Wi-Fi. When the connection to this unit is complete, the image being captured by the smartphone will be displayed on the Sub Window of this unit. ≥ If the connection cannot be established or no image appears on the Sub Window, follow the steps below to set up the connection again: 1 Touch the screen of this unit and touch . 2 Touch [Change Device] on the screen of this unit. 3 Close the smartphone application "Image App", and then touch [Reset] on the device registration screen. 4 Touch [YES]. After completing the steps above, follow the procedure from Step 2 onwards in "Selecting this unit's SSID on the smartphone to set up a connection" in "When connecting a smartphone to this unit as a Wireless Sub Camera for the first time (To use the Wireless Multi-Camera function)". (l 226) To replace the registered smartphones 1 Press Wi-Fi button on this unit and touch [Multi Camera]. 2 Touch the name of the registered device you want to replace. ≥ Close the smartphone application "Image App", and then follow the procedure from Step 3 on page 226. ≥ To set up a connection by scanning a QR code, follow   the procedure from Step 3 on page 229. ≥ When the connection to this unit is complete, the device name will be changed to that of the newly-registered C [Reset] D [ENTER] device. - 231 -