Panasonic HDC HS100 Hd Video Camera - Multi Language - Page 70
Zoom operation, Manual focus adjustment, Zoom by rotating the ring., Select the menu.
UPC - 037988257119
View all Panasonic HDC HS100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Zoom operation Zoom operation can be done using the multi manual ring. ≥ Move the AUTO/MANUAL switch from the MANUAL to FOCUS/ZOOM position, and display [ ]. (l 69) Zoom by rotating the ring. A side: Close-up recording (zoom in) A B side: Wide-angle recording (zoom out) ≥ The zoom speed varies depending on the B speed to rotate the ring. ≥ Auto focus is on when [ ] is displayed. Manual focus adjustment If auto focusing is difficult due to the conditions, then use manual focus. ≥ Move the AUTO/MANUAL switch from the MANUAL to FOCUS/ZOOM position, and display [MF]. (l 69) 1 (When MF assist function is used) ≥ Face detection framing is not displayed when Select the menu. (l 29) the display is enlarged even if [FACE FRAMING] is set to [ALL]. [ADVANCED] # [MF ASSIST] # [ON] ≥ This function's default setting is [ON]. ≥ The zebra pattern does not appear on the part of the screen that is enlarged when [ZEBRA] is [ON]. 2 Adjust the focus by rotating the ≥ Luminance display is not displayed when the display is enlarged even if [LUMINANCE] is set ring. to [ALWAYS]. ≥ Histogram is not displayed when the display is enlarged even if [HISTOGRAM] is set to [ALWAYS]. The center of the screen is enlarged. The normal screen returns approximately 2 seconds after you finish bringing the subject into focus. ≥ The center of the screen is not enlarged when [MF ASSIST] is [OFF]. ≥ To return to auto focus, move the AUTO/ MANUAL switch to FOCUS/ZOOM position and display [ ], or set to AUTO. ≥ MF assist does not work if the zoom magnification is more than 12k. ≥ The part of the screen that is enlarged is not enlarged on the image actually recorded. 70 VQT1T93