Panasonic HDC-HS80K HDCHS80 User Guide - Page 67
WIND NOISE CANCELER], ZOOM MIC], MIC LEVEL], Select the menu., Touch, to adjust.
View all Panasonic HDC-HS80K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
[WIND NOISE CANCELER] This will reduce the wind noise coming into the built-in microphones while maintaining the realism. ≥ Switch to Manual Mode. (l 72) MENU : [RECORD SETUP] # [WIND NOISE CANCELER] # [ON] ≥ This function's default setting is [ON]. ≥ When switching to Intelligent Auto Mode, [WIND NOISE CANCELER] is set to [ON], and the setting cannot be changed. ≥ You may not see the full effect depending on the recording conditions. [ZOOM MIC] Directivity of the microphone is synchronized with the zoom operation. Sounds near the front of the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds are recorded more realistically if you zoom out (wide angle). ≥ Switch to Manual Mode. (l 72) MENU : [RECORD SETUP] # [ZOOM MIC] # [ON] [MIC LEVEL] When recording, the input level from the built-in microphones can be adjusted. ≥ Switch to Manual Mode. (l 72) 1 Select the menu. MENU : [RECORD SETUP] # [MIC LEVEL] # desired setting [AUTO]: [SETr ]/[SET]: AGC is activated, and the recording level is adjusted automatically. The desired recording level can be set. 2 (When [SETr ]/[SET] is selected) Touch / to adjust. ≥ Touch to activate/disactivate AGC. When AGC is activated, the icon is surrounded by yellow and the amount of sound distortion can be reduced. When AGC is disactivated, natural recording can be performed. ≥ Adjust the microphone input level so that the last 2 bars of the gain value are not red. (Otherwise, the sound is distorted.) Select a lower setting for A Left B Right C Microphone input level microphone input level. 3 Touch [ENTER] to set the microphone input level and then touch [EXIT]. ≥ (Microphone input level meter) appears on the screen. 67 VQT3J15