Panasonic HDCDX1P Hd Video Camera - English / Spanish - Page 120
Problem, Check points, pictures recorded on
View all Panasonic HDCDX1P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Others Problem Recording starts but stops immediately. The playback picture breaks up for a moment. The unit arbitrarily stops recording. Auto focus function does not work. Recorded still pictures are not clear. Sound is not played back from the built-in speaker of this unit. Sound is played back from one side of speakers when motion pictures recorded on this unit are played back on another device. Although this unit is correctly connected to a TV, images cannot be seen. The images are squeezed horizontally. Check points ≥Is the disc scratched or dirty? # Wipe off the dirt on the disc. (l 30) If the disc is scratched, insert a new one. ≥The unit is hot. Follow the messages on the display. To use the unit again, turn the unit off and leave it for a while. ≥Is the AGS function activated? # Record in the normal horizontal position or set [AGS] to [OFF]. (l 49) ≥Is manual focus mode selected? # Set the AUTO/MANUAL/FOCUS switch to AUTO. ≥Are you trying to record a scene which is hard to bring into focus in auto focus mode? # There are some recording subjects and surroundings for which the auto focus does not operate correctly. (l 128) If so, use the manual focus mode to adjust the focus. (l 70) ≥Are you trying to record small or finely detailed objects with [PICT. QUALITY] set at [ ]? # If you try to record small or finely detailed objects with [PICT. QUALITY] set at [ ], the images may break up into a mosaic-like pattern. Record with [PICT. QUALITY] set at [ ] instead. (l 56) ≥Is the volume too low? # During playback, move the volume lever to display the volume indication and adjust it. (l 76) ≥The internal microphones of this unit record sound with Dolby Digital 5.1 Creator. When the sound is played back on another device, if stereo 2 channel speakers on TV are used, the sound may be played back from one side of the speakers. When the TV has surround sound effect function, we recommend using it. Refer to the operating instructions of the TV for how to operate the surround sound effect. ≥Does the input switch on the TV match the connected terminal? # Please read the operating instructions of your TV and select the channel that matches the input used for the connection. ≥Is the [TV ASPECT] setting correct? # Change the setting to match the aspect ratio of the TV. Press the MENU button, then select [SETUP] # [TV ASPECT] # [16:9] or [4:3] and press the cursor button. ≥Are the HDMI and component cables connected to the unit while in recording or PC connection mode? # If both HDMI and component cables are to be connected, set the unit to playback mode. 120 LSQT1093