Panasonic HDCHS700 HDCHS700 User Guide - Page 13

Quick Guide ∫ Charging the battery  Charging lamp [CHARGE] A  Lights up:  Charging Goes off: Charging completed 1 Connect the AC cable to the AC adaptor and the AC outlet. 2 Insert the battery into the AC adaptor by aligning the arrows. ∫ Inserting the battery Install the battery by inserting it in the direction shown in the figure. 1) Open the LCD monitor. ≥ Check that the access lamp has gone off. 2) Open the SD card/terminal cover and insert (remove) the SD card into (from) the card slot. ≥ Face the label side B in the direction shown in the illustration and press it straight in as far as it will go. ≥ Press the center of the SD card and then pull it straight out. 3) Securely close the SD card/terminal cover. ≥ Securely close it until it clicks. ∫ Turning the unit on/off Turning the power on and off with the power button Press the power button to turn on the power.  A Insert the battery until it clicks and locks. ∫ Inserting/removing an SD card  A The status indicator lights. ≥ To turn off the power, hold down the power button until the status indicator goes off. Turning the power on and off with the LCD monitor/viewfinder Opening the LCD monitor or extending the viewfinder turns on the power. Closing the LCD monitor/viewfinder turns off the power. To turn on the power  Access lamp [ACCESS] A ≥ When this unit is accessing the SD card or built-in memory, the access lamp lights up. A The status indicator lights on. 13 VQT2M75