Panasonic HX-DC1H User Manual - Page 30
Turning off the camera, Turning on the camera when it is in the sleep mode
View all Panasonic HX-DC1H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
SETUP Turning off the camera 1 Press the power button for at least 1 second. h The camera turns off. h If you briefly press the power button, once, the camera will switch to the sleep mode. Turning on the camera when it is in the sleep mode In order to preserve battery pack power, the ECONOMY function operates to automatically turn off the camera (sleep mode) after about 5 minutes of no use during shooting, or about 5 minutes of no use during playback (factorypreset settings). i When the camera is in the sleep mode, it turns on when the monitor unit is opened or one of the camera's buttons is pressed. i When the AC adaptor is connected, the ECONOMY mode will become active about 5 minutes after the camera is turned on (factory-preset setting). i The user can specify the time elapsed before the sleep mode is activated (page 103). HINT About the standby mode i The camera goes into the standby mode if you close the monitor unit, or if you leave it in the sleep mode for about 1 hour. The standby mode uses almost no power. i Open the monitor unit, or press the power button briefly, and the camera turns on immediately and you are ready to shoot or view images without any delay. Use the standby mode to turn off the camera only briefly, or if you want to be able to use it immediately. i If you close the monitor unit while recording a video, recording stops and the camera switches to the standby mode. 30 VQT3N01