Panasonic HomeHawk 1080p HomeHawk Users Guide - Page 27

Blue White Green Red Getting started with the HomeHawk! Normal operation, connected to wireless router*1, privacy shutter is open Normal operation, connected to wireless router*1, privacy shutter is closed Camera is searching for wireless router Initial setup required Initial setup is in progress with mobile device connected Initial setup is starting Motion detected*1, or camera is starting up Live images are being viewed or recorded, or camera is starting up Device malfunction *1 You can configure the camera so that its LED indicator does not light during normal operation or when motion is detected. See "HD camera device profiles", Page 130. Floor camera LED indicator Off Green R No power R LED indicator is turned off*1 Registration successfully completed*3 or signal level is strong*2 Registration mode, updating Camera is searching for your wireless router Blinking every 1.5 seconds Red Batteries for power backup are in use Registration failed*3, signal level is weak*2 Yellow R Streaming data*1 or detecting motion*1 R Accessing microSD card (when privacy mode is off) R Camera is out of range of your wireless router*2 R LED lights are abnormally hot R Wireless LAN connection failed Not registered to your wireless router (usually for initial setup), or signal level is good*2 Initial setup is being performed using WPS on your router Blue White Registration to your wireless router successfully completed or camera is on*1 Privacy mode is on*1 Accessing microSD card (when privacy mode is on) 27