Panasonic HomeHawk WINDOW Quick Starter Guide - Page 1

FOLLOW THESE STEPS Page 1 Quick Start Guide What's in the box Double-sided tape (2 sets) Let's get started! Cover AC adaptor Cable clips Camera (window side) PNQW5976ZA PP0620KT0 WARNINGS Failure to observe WARNINGS could result in damage to the product and any of its room exteriors. ● Please note: Failure to properly attach the suction cup in accordance to the quick start guide may result in the product detaching from the window. The camera should be reattached regularly to avoid premature detachments or we recommend using the double-sided tape to secure the camera to the window. ● The double-sided tape has an average bonding life of 2 years and requires replacement of the tape to ensure the proper attachment surface connection. ● The wire holding clip should be attached on a surface that has been tested to avoid possible damage to paint; plaster walls; wall paper etc. ● The enclosed double-sided tapes are designed to be used on standard window glass surfaces. If your window contains materials such as tinted film, we recommend you consult with the window manufacturer prior to use to avoid window damage. 1. Clean the window before installation ŋ Remove dirt and oil with a towel and detergent, and then dry completely. 2. Insert a microSD card ŋ
microSD cards are not included. ● The window is an image. 3. Fully insert the AC adaptor connecter Power outlet 4. Application Setup A Install the HomeHawk app Search for "Panasonic HomeHawk" ŋDo you have it already? Make sure the version is the latest. B Set up the app Launch the HomeHawk app. Select the device "WINDOW Camera". Follow the on-screen instructions to complete the setup. After completing setup, tap the " " icon on the screen. ŋBlinking red LED is normal. It's detecting movement. 5. Remove the transparent film (window side) 6. Place the camera on the window AAPrPeressssththeeeenntirteireccaammeerara B While pressing the center, firfmirmlylyaaggaaininstsththeewwininddooww C Pull up the LOCK lever to fofor 3r 3seseccoonndds s secure the camera C B 7. Attach the cover A Tuck removal tab inside B Attach the cover "Click" BA 8. Manage the power cable with the cable clips as necessary (Included) To assure the camera doesn't fall !! Reattach suction cup when notification pops STEP 1 Remove Camera 2 steps up (3 months). STEP 2 PULL Power outlet Months ? Want to attach it long term? ‎ Go to Page 2 YYoouu ccaann aallssoo acchceecsks rtehme orevmaloinvfaolrpmroactioendure fwroitmh athQe RQcRocdoed.e. Page 1