Panasonic KX-FLB811 Mfp Laser Fax - Page 55
Scanning, 7.5 Using the unit as a scanner, 5.1 Using Multi-Function, Viewer
UPC - 037988809820
View all Panasonic KX-FLB811 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Twisted Curled Bent-edged Waved Dog-eared Self adhesive Do not attempt to print on any of the following types of envelopes (these may cause damage to the unit): L Envelopes with clasps, snaps or tie strings L Envelopes with transparent windows L Envelopes that use encapsulated types of adhesive that do not require moistening but rely on pressure to seal them Clasp Transparent window 7. Multi-Function Station software Scanning 7.5 Using the unit as a scanner L Keep the front cover page open for button locations. 7.5.1 Using Multi-Function Viewer 1 Set the original. Using the auto document feeder Insert the document (up to 40 pages) FACE UP into the feeder until a single beep is heard. L Confirm that there are no documents on the scanner glass. Using the scanner glass Place the document FACE DOWN on the scanner glass, matching the top edge of the document to the l mark on the unit. L Confirm that there are no documents in the auto document feeder. 2 Start Multi-Function Station. 3 Select [Viewer(Scan)]. L [Multi-Function Viewer] will appear. 4 Click the [Scan] icon in the [Multi-Function Viewer] window. L The [Panasonic KX-FLB811]/ [Panasonic KX-FLB801] (default name) dialog box will appear. 5 If necessary, change the scanning settings on your computer. L To preview the scanned image, click [Preview]. Only first page will be displayed. You can drag the frame to specify the scanned area. If you change the scan mode, brightness, or contrast setting, click [Preview] to refresh the scanned image. If you use the auto document feeder, set the document again before refreshing the scanned image. L If you select [B/W Graphic] for scan mode, the resolution range will be from 150 to 600 dpi. 6 Click [Scan]. L If you preview the scanned image using the auto document feeder in step 5, set the document again and click [Scan]. L The scanned image will be displayed in the [Multi-Function Viewer] window after scanning. 53