Panasonic KX-NT321-B Quick Reference Guide - Page 13
Locking the Handset Hook
View all Panasonic KX-NT321-B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Wall Mounting Wall Mounting 1. Remove the stand if it is attached. For information on removing the stand, refer to page 11. 2. Attach the wall mounting adaptor as shown. • Make sure the cables are not pinched by the wall mounting adaptor. When running the cables from the top of the unit, look through the opening in the wall mounting adaptor to confirm that the cables are not being pinched. • Slide the wall mounting adaptor in the direction indicated until it locks into place. 3. Drive the 2 screws into the wall either 83 mm or 100 mm apart, and mount the unit on the wall. • You can find a wall mounting template on page 19. • Make sure that the wall that the unit will be attached to is strong enough to support the unit 83 mm 100 mm (approx. 1.5 kg). • Make sure the cables are securely fastened to the wall. • When this unit is no longer in Washer use, make sure to detach it from the wall. Drive the screw to this point. Locking the Handset Hook Pull down the handset hook until it locks to prevent the handset from falling off the handset cradle when the unit is mounted to a wall or set at a high angle. To temporarily place the handset down during a conversation, hook it over the top edge of the unit as shown. 13