Panasonic KX-PRWA13W KX-PRWA13W Owner's Manual (English) - Page 4
For your safety, Registering a handset to a base unit, Display language, WARNING
![]() |
View all Panasonic KX-PRWA13W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Installation Registering a handset to a base unit 1 Handset: Lift the handset and press MOFFN. 2 Base unit: Press and hold MLOCATORN for about 5 seconds. R If all registered handsets start ringing, press MLOCATORN again to stop, then repeat this step. 3 Handset: Place the handset on the base unit or charger, then wait until a long beep sounds and is displayed. Note: R If an error tone sounds, or if is displayed, register the handset according to the base unit's operating instructions. Display language 1 MMenuN (right soft key) #110 2 MbN: Select the desired setting. a MSaveN a MOFFN For your safety To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire. R Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact us at http://www.panasonic.com/contactinfo 4 For assistance, please visit http://www.panasonic.com/help
![](/manual_guide/products/panasonic-kxprwa13w-kxprwa13w-owners-manual-english-c8fb78d/4.png)