Panasonic KX-TD7684 2.4 Ghz Portable Station - Page 57
Troubleshooting and Error Messages, Troubleshooting
UPC - 037988852192
View all Panasonic KX-TD7684 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Troubleshooting and Error Messages Troubleshooting Troubleshooting Problem Possible Cause Solution The handset does not The battery is drained. work. The power is OFF. Charge the battery fully. (See "Charging the Battery" on page 5.) • Turn it ON. (See "Location of Controls" on page 7.) • Re-insert the battery and try again. (See "Battery Installation" on page 5.) The handset does not Ringer volume is set to "Off". ring. You cannot make/ receive a call. The handset is out of range, or the CS is busy. Adjust the ringer volume level. (See "Adjusting the Ringer Volume" on page 12.) Move closer to the CS or try again later. The radio channel is busy, or a radio communication error occurred. Try again later. You cannot dial. The number that you dialed is restricted by the PBX. Consult your dealer. Key lock mode is ON. To cancel the mode, press the Joystick for about 2 seconds. (See "Key Lock" on page 8.) The radio channel is busy or a radio communication error occurred. Try again later. The handset stops working during operation. • Turn the handset off, then turn it back on. (See "Location of Controls" on page 7.) • Re-insert the battery and try again. (See "Battery Installation" on page 5.) You cannot use the handset during a power failure. The handset will not function during a power failure because the PBX stops emitting radiowaves. The headset does not A headset tone cannot be heard • Make sure the headset tone set- work. when receiving an incoming call ting is set to on. (See "Incoming when the headset is attached. Option" on page 49.) • Make sure the headset jack is connected properly. (See "Loca- tion of Controls" on page 7.) The tone from the headset cannot be changed to a bell or melody. Noise is frequently heard. The headset tone is a specific tone and is not related to the Incoming Option settings (Ringer Type). • • Set the handset and CS away from other electrical appliances. Move closer to the CS. Document Version 2007-06 57