Panasonic KX-TG103 Operating Instructions CA - Page 13

Display Handset display items Displayed item w 5 Example: [1] In use Meaning Within range of the base unit L When flashing: Handset is searching for base unit. (out of range of base unit, handset is not registered to base unit, no power on base unit) Battery level The handset's extension number (example shown here: handset 1) Line or answering system is being used by another handset or the base unit. Setting up the unit before use Display language You can select either "English" or "Français" as the display language. The default setting is "English". 1 {MENU} 2 {V}/{^}: "Handset settings" i {OK} 3 {V}/{^}: "Display settings" i {OK} Preparation 4 {V}/{^}: "Change language" i {OK} 5 {V}/{^}: Select the desired setting. 6 {OK} i {OFF} Note: L How to change from French back to English: 1 {MENU} 2 {V}/{^}: "Param.combiné" i {OK} 3 {V}/{^}: "Affichage" i {OK} 4 {V}/{^}: "Changer langue" i {OK} 5 {V}/{^}: "English" i {OK} i {OFF} Voice guidance language You can select either "English" or "Français" as the voice guidance language of the answering system. The default setting is "English". 1 {MENU} 2 {V}/{^}: "Answering device" i {OK} 3 {V}/{^}: "Settings" i {OK} 4 {V}/{^}: "Voice prompt" i {OK} 5 {V}/{^}: Select the desired setting. 6 {OK} i {OFF} Dialing mode If you cannot make calls, change this setting according to your telephone line service. The default setting is "Tone". "Tone": For tone dial service. "Pulse": For rotary/pulse dial service. 1 {MENU} 2 {V}/{^}: "Set tel line" i {OK} 3 {V}/{^}: "Set dial mode" i {OK} 4 {V}/{^}: Select the desired setting. 5 {OK} i {OFF} 13