Panasonic KX-TG103 Quick Guide US - Page 5

TG103x_QG(e).fm 5 Quick troubleshooting 1 Handset shows: "No link to base. Move closer to base, try again." Place the handset on the base unit, then check if "Charging" is displayed. "Charging" is not displayed. Unplug and then plug AC adaptor properly to both the base unit and AC outlet. "Charging" is displayed, now. "Charging" is displayed. "Charging" is still not displayed. Lift the handset, then try again. If handset still shows the same message, try re-registration as explained later in this guide. Re-registration failed. Unplug the AC adaptor of the base unit and remove the batteries from the handset, then plug in the AC adaptor and insert the batteries into the handset again. Try re-registration as explained later in this guide. Re-registration failed. Your telephone may need service. Please visit http://www.panasonic.com/help for further troubleshooting. - 5 -