Panasonic KX-TG2130W KXTG2130 User Guide - Page 14

Making/Answering Calls Making calls 1 Lift the handset and dial the phone number. L To correct a digit, press {CLEAR}. 2 Press {C}. 3 When you finish talking, press {OFF} or place the handset on the base unit. Note: L If an alarm tone sounds in step 2, move closer to the base unit or place the handset on the base unit, and try again. L If additional dialing is necessary after using speed dialing functions such as phonebook dialing or REDIAL, wait until speed dialing is finished to continue further dialing. Otherwise, the unit may not dial properly. If noise interferes with the conversation Press {CH} to select a clearer channel while talking or move closer to the base unit. Note: L You cannot use this feature while listening to messages using the handset. To redial after confirming the last number dialed Press {REDIAL}, then press {C}. To select the receiver volume (4 levels) Press VOL. {V} or {^} repeatedly while talking. PAUSE button (for PBX/long distance service users) A pause is sometimes required when making calls using a PBX or long distance service. For example, if you need to dial the line access number "9" when making outside calls with a PBX: 1 Press {9}, then press {PAUSE}, then dial the phone number. 2 Press {C}. Note: L A 3.5 second pause is inserted each time {PAUSE} is pressed. Press repeatedly to insert longer pauses. Answering calls When a call is being received, the IN USE indicator on the base unit flashes rapidly. 1 Lift the handset and press {C}. L You can also answer the call by pressing any button except {OFF}, {#} and {CH}. (Any key talk feature) 2 When you finish talking, press {OFF} or place the handset on the base unit. Temporary ringer off While the handset is ringing for an outside call, you can turn the ringer off temporarily by pressing {#}. 14 For assistance, please visit http://www.panasonic.com/help