Panasonic KX-TG6431M Expand Digital Ans Sys - Multi Language - Page 26
Call block Caller ID, subscribers only, Tone/Melody, Voice, Caller blocked
UPC - 037988481729
View all Panasonic KX-TG6431M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Programming 4 {V}/{^}: Select "Tone/Melody" or "Voice". i {SELECT} 5 {V}/{^}: Select the desired item. i {SAVE} L If you set a tone or melody, we recommend selecting a different one for outside calls. 6 {OFF} L When the alarm is set, E is displayed. Note: L To stop the alarm, press any dial key or place the handset on the base unit or charger. L When the handset is in use, the alarm will not sound until the handset is in standby mode. L If the talking alarm clock is set at the same time for two or more handsets, the first handset makes the announcement, while the other handsets only sound the tone. L If the other unit is in use at the set time, the handsets sound the tone instead of the selected announcement. L If you select "Once", the setting changes to "Off" after the alarm sounds. Call block (Caller ID subscribers only) This feature allows the unit to reject calls when: - the unit receives a call from a phone number stored in the call block list as unwanted ("Storing unwanted callers", page 26). - the unit receives a call without phone number ("Block calls without phone number", page 27). When a call is received, the unit rings for a short time while the caller is being identified. If the unit recognizes the call as unwanted, "Caller blocked" is displayed and the unit sends out a busy tone to the caller, and then disconnects the call. Important: L When the unit receives a call from a number that is stored in the call block list or a call without a recognized phone number, the call is logged in the caller list (page 29) with $ after the call is disconnected. Storing unwanted callers You can store up to 30 phone numbers in the call block list by using the caller list or by entering the numbers directly. Important: L You must store the phone number with an area code (10 digits) in the call block list. ■ From the caller list: 1 {MENU} i {#}{2}{1}{3} 2 {V}/{^}: Select the entry to be blocked. L To edit the number, press {EDIT} repeatedly until the phone number is shown in the 10-digit format. 3 {SAVE} 4 {V}/{^}: "Call block" i {SELECT} 5 {V}/{^}: "Yes" i {SELECT} i {OFF} ■ By entering phone numbers: 1 {MENU} i {#}{2}{1}{7} i {ADD} 2 Enter the phone number (32 digits max.). L To erase a digit, press {CLEAR}. 3 {SAVE} i {OFF} 26 For assistance, please visit http://www.panasonic.com/help