Panasonic KX-TG7743S Operating Instructions - Page 64
Making/answering calls, intercom
View all Panasonic KX-TG7743S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Useful Information Problem I fully charged the batteries, but - still flashes, - is displayed, or - the operating time seems to be shorter. Cause/solution R Clean the battery ends ( , ) and the charge contacts with a dry cloth and charge again. R It is time to replace the batteries (page 11). Making/answering calls, intercom Problem is displayed. Noise is heard, sound cuts in and out. The handset or base unit does not ring. I cannot make local calls with the handset or base unit using a cellular line. I cannot make or answer cellular calls with the handset or base unit. Cause/solution R The handset is too far from the base unit. Move closer. R The base unit's AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. R The handset is not registered to the base unit. Register it (page 42). R You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. R Move closer to the base unit. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. R The ringer volume is turned off. Adjust the ringer volume (page 35, 37). R When one handset is selected to ring for cellular calls, other units do not ring. To change the selection, see page 19. R Silent mode is turned on for the handset. Turn it off (page 40). R You need to add your area code when making cellular calls. Store your area code in order to automatically add it to the beginning of the 7-digit phone number when making cellular calls (page 21). R Depending on the cellular phone's compatibility, you may not be able to make or answer cellular calls even if the cellular phone is connected to the base unit. R Make sure that the CELL 1 or CELL 2 indicator lights green and the cellular phone is connected to the base unit (page 20). R If someone is talking on a cellular call or using the headset, you cannot use the cellular feature. There can be only one active Bluetooth connection at a time. R The cellular phone is being used separately from your system. 64 For assistance, please visit http://www.panasonic.com/help TG7731_41_(en-en)_1121_ver.021.p64 64 2011/11/21 12:02:15