Panasonic KX-TG784 Operating Instructions CA - Page 45
Special programming, Alarm, Night mode
View all Panasonic KX-TG784 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Programming *10 If you subscribe to a distinctive ring service, select a tone (tone 1 to 3). If you select a melody, you cannot distinguish lines by their ringers. *11 This tone lets you know when you receive an outside call while you are on another line or an intercom call. If you select "On", the tone sounds 2 times. *12 This setting is available when you have the key detector (KX-TGA20). Read the installation guide for more information on the key detector. *13 For models with supplied key detectors, the display shows "1: Detector1". *14 If you register 2 or more key detectors. *15 If you have 2 or more key detectors. *16 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any keys, including confirmation tones and error tones. *17 If you subscribe to a Call Display service and want to view the caller's information after lifting up the handset to answer a call, turn off this feature. *18 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary. *19 Generally, the line mode setting should not be changed. This setting automatically maintains receiver volume at the proper level depending on the current telephone line condition. Set the line mode to "A" if telephone line condition is not good. *20 This setting is available when a cellular phone is paired. *21 KX-TG7871 series: page 3 *22 This setting is available when a headset is paired. Special programming Alarm An alarm sounds at the set time for 3 minutes once or daily. Alarm can be set for each handset. Important: R Set the date and time beforehand (page 17). Handset 1 MMENUN#720 2 MbN: Select the desired alarm option. a MSELECTN "Off" "Once" "Daily" Turns alarm off. Go to step 7. An alarm sounds once at the set time. An alarm sounds daily at the set time. Go to step 4. 3 Enter the desired month and date. a MOKN 4 Set the desired time. 5 *: Select "AM" or "PM". a MOKN 6 MbN: Select the desired alarm tone. a MSELECTN R We recommend selecting a different ringer tone from the one used for outside calls. 7 MSELECTN a MOFFN R When the alarm is set, is displayed. Note: R To stop the alarm, press MOFFN or place the handset on the base unit or charger. R When the handset is in use, the alarm will not sound until the handset is in standby mode. Night mode Night mode allows you to select a period of time during which the handset and/or base unit will not ring for outside calls. This feature is useful for time periods when you do not 45 TG78xxC(en)_1221_ver013.pdf 45 2012/12/21 11:21:31